**Albuquerque Homes: Is "Green" Stucco Hiding Radon?**
By Franklin Everett ShawForget the HGTV dream of a perfect Albuquerque home. Let’s talk about something far more insidious lurking beneath that charming green stucco: radon. And let’s be blunt: there’s a potential problem, and ignoring it is foolish.
Albuquerque, New Mexico, sits atop a geological hotbed, a uranium-rich landscape that naturally produces radon gas. This odorless, colorless gas seeps up from the ground and can accumulate inside homes, increasing the risk of lung cancer. The question is, does the popularity of green stucco in Albuquerque exacerbate this issue? I believe it could, and here’s why.
The stucco itself isn’t the problem. It’s the application and the geology. Albuquerque’s soil composition, particularly in areas like the Northeast Heights and the foothills, contains higher concentrations of uranium. Radon is a byproduct of uranium decay.
Stucco, when applied correctly, should create a relatively airtight barrier. However, cracks, poor sealing around windows and doors, and inadequate ventilation can all create pathways for radon to enter. The problem is, stucco application isn’t always perfect. Cost-cutting measures, inexperienced contractors, and the natural settling of a house can all lead to cracks.
Now, where does the green come in? The pigment itself is unlikely to directly affect radon levels. However, the type of pigment and the quality of the stucco mix can influence its permeability. Cheaper stucco mixes, potentially used to keep costs down on those ubiquitous green homes, might be more porous, allowing radon to seep through more easily. This is a hypothesis, not a proven fact, but it’s a plausible concern.
Here’s a step-by-step guide to radon testing in your Albuquerque stucco home:
Choose a Testing Method: You have two main options: short-term and long-term tests. Short-term tests (2-7 days) are quicker but less accurate. Long-term tests (90 days or more) provide a more reliable average radon level. For an initial assessment, a short-term test is fine.
Purchase a Radon Test Kit: You can find these at local hardware stores like Lowe’s or Home Depot, or online retailers like Amazon. Make sure the kit is certified by the National Radon Proficiency Program (NRPP) or the National Radon Safety Board (NRSB). In Albuquerque, check if the kit is also recognized by the New Mexico Environment Department.
Placement is Key: Follow the instructions precisely. Typically, you’ll place the test kit in the lowest livable level of your home (e.g., the basement, or the first floor if you don’t have a basement). Avoid placing it near windows, doors, or exterior walls. Keep it away from drafts and high-humidity areas like bathrooms or kitchens.
Conduct the Test: Start the test according to the kit’s instructions. For short-term tests, this usually involves opening the device and leaving it undisturbed for the specified period. For long-term tests, it’s the same process, just for a longer duration.
Send the Sample to the Lab: Once the testing period is complete, seal the kit and mail it to the lab specified in the instructions. The lab will analyze the sample and send you the results.
Interpret the Results: The EPA recommends taking action if your radon level is 4 picocuries per liter (pCi/L) or higher. Even levels between 2 pCi/L and 4 pCi/L warrant consideration of mitigation.
Albuquerque-Specific Resources for Radon Mitigation:
- New Mexico Environment Department (NMED): The NMED provides information on radon testing, mitigation, and certified radon professionals in New Mexico. Their website is a valuable resource.
- Local Radon Mitigation Companies: Several companies in Albuquerque specialize in radon mitigation. Get quotes from at least three different companies before making a decision. Look for companies with NRPP or NRSB certification.
- City of Albuquerque Building Codes: Familiarize yourself with local building codes related to radon mitigation. New construction in some areas may require radon-resistant construction techniques.
Common Mistakes and Pitfalls:
- Improper Test Placement: Placing the test kit in the wrong location can significantly skew the results. Follow the instructions carefully.
- Ignoring High Radon Levels: Don’t dismiss high radon levels. Radon is a serious health hazard.
- DIY Mitigation: Radon mitigation is best left to professionals. Improper mitigation can actually worsen the problem.
- Failing to Retest: After mitigation, retest your home to ensure the system is working effectively.
Does the color pigment in “green” stucco impact radon detection? No, the color pigment itself will not interfere with the radon detection process. Radon detectors measure the radioactive decay of radon gas, not the color of the surrounding materials. However, as mentioned earlier, the quality of the stucco mix, which could be influenced by the type and amount of pigment used, might indirectly affect radon levels by altering the stucco’s permeability.
Here’s a real-world scenario: Let’s say you live in a charming green stucco home in the La Cueva area of Albuquerque. You’ve lived there for years and never thought about radon. However, you start experiencing persistent coughs and fatigue. You decide to get your home tested for radon. The results come back at 6 pCi/L, well above the EPA’s action level.
What do you do?
- Contact a Certified Radon Mitigation Professional: Get quotes from several companies.
- Choose a Mitigation System: The most common mitigation system is sub-slab depressurization, which involves installing a pipe and fan to draw radon gas from beneath the foundation and vent it outside.
- Install the System: The mitigation company will install the system, typically in a day or two.
- Retest Your Home: After the system is installed, retest your home to ensure the radon level is below 4 pCi/L.
The key takeaway is this: Don’t assume your green stucco home in Albuquerque is radon-free. The combination of geological factors and potential construction vulnerabilities makes testing essential. Take the steps outlined above to protect your health and your family. Ignoring the risk is simply not worth it.