Austin Algae: Is Pool Shock Burning Youth Lasers?
By Franklin Everett ShawThe green monster has invaded your Austin pool. It’s not just unsightly; it’s a potential hazard to your health and, surprisingly, your expensive pool equipment. Many homeowners in the Austin area, from Pflugerville to Lakeway, are battling algae blooms, and the knee-jerk reaction – a massive dose of shock – can backfire spectacularly, especially if you’ve invested in advanced systems like UV sanitizers (often called “youth lasers” by pool salespeople) or high-end automatic cleaners. Let’s dive into how to eradicate algae safely and effectively, protecting your investment and your peace of mind.
First, know thy enemy. Algae isn’t just one thing. In Austin, you’re most likely to encounter:
- Green Algae: The most common, turning your pool a murky green. It thrives in warm, sunny conditions – basically, Austin’s entire summer.
- Yellow Algae (Mustard Algae): Often mistaken for dirt or pollen, this chlorine-resistant algae clings to walls and is a pain to eradicate.
- Black Algae: The most stubborn, forming dark, raised spots that protect it from chemicals. It loves rough surfaces like grout.
Misidentifying the algae leads to ineffective treatment. A common mistake is assuming all algae is green algae and using a standard shock treatment. This might work for a mild green bloom, but it’ll barely touch mustard or black algae.
Now, let’s talk about shocking – the right way. The goal is to raise the chlorine level high enough to kill the algae, but doing it carelessly can damage your equipment.
Here’s a step-by-step guide, tailored for Austin pools:
- Test Your Water: Before you do anything, get a complete water test. Leslie’s Pool Supplies on Research Blvd or Pinch a Penny on William Cannon Drive can do this for free. Knowing your pH, alkalinity, and calcium hardness is crucial.
- Balance Your Water: Algae thrives in unbalanced water. Adjust your pH to between 7.2 and 7.8 and your alkalinity to between 80 and 120 ppm. Use muriatic acid to lower pH and alkalinity increaser to raise it.
- Clean the Pool: Brush the walls and floor thoroughly to loosen the algae. Vacuum the pool to remove debris. Backwash your filter to ensure it’s clean. This is critical; otherwise, you’re just circulating algae-infested water.
- Calculate the Shock Dosage: This is where most people mess up. The amount of shock you need depends on the type of algae and the size of your pool. A general rule of thumb is to use 1-3 pounds of calcium hypochlorite (cal hypo) shock per 10,000 gallons of water for green algae. For mustard or black algae, you’ll need to double or even triple that amount.
- Pre-Dissolve the Shock: Never add granular shock directly to your pool. It can bleach your liner and damage your pool equipment. Always pre-dissolve the shock in a bucket of water before adding it to the pool.
- Add Shock at Dusk or Night: Chlorine is broken down by sunlight, so shocking at night maximizes its effectiveness.
- Run Your Pump: Keep your pump running for at least 24 hours after shocking to circulate the chlorine.
- Monitor Chlorine Levels: Test your chlorine levels regularly. You want to maintain a high chlorine level (above 10 ppm) until the algae is gone.
- Clean Your Filter Again: After the algae is dead, clean your filter thoroughly to remove any remaining algae spores.
Now, about those “youth lasers” (UV sanitizers). These systems are great for reducing chlorine demand and killing bacteria, but they’re not a magic bullet for algae. High chlorine levels from shocking can damage the UV lamp and other components.
Here’s the key: Bypass your UV system during the shocking process. Most UV systems have a bypass valve. If yours doesn’t, you’ll need to disconnect it temporarily. Consult your UV system’s manual for specific instructions. Ignoring this step can lead to costly repairs.
Automatic pool cleaners are also vulnerable. High chlorine levels can degrade the plastic and rubber components of your cleaner. Remove your automatic cleaner from the pool during the shocking process. Let the high chlorine levels dissipate before putting it back in.
What about eco-friendly alternatives? Austin is increasingly focused on water conservation, and traditional chlorine shock isn’t exactly environmentally friendly.
Here are some options:
- Phosphate Removers: Algae needs phosphates to grow. Phosphate removers starve the algae, making it easier to kill with chlorine.
- Enzymes: Enzymes break down organic matter that algae feed on.
- Ozone Generators: Ozone is a powerful oxidizer that can kill algae without the harsh chemicals of chlorine. However, ozone generators are expensive and require professional installation.
- Copper Ionizers: Copper ions are toxic to algae. Copper ionizers are a good option for long-term algae control, but they’re not as effective for killing existing blooms. Be careful with copper; it can stain light-colored pool surfaces.
Important Note: Austin Water offers rebates for water-saving pool equipment, including variable-speed pumps and pool covers. Check their website for details.
Common pitfalls and how to avoid them:
- Not balancing your water first: Unbalanced water makes it harder for chlorine to kill algae.
- Using the wrong type of shock: Different types of shock have different strengths and properties.
- Not using enough shock: Under-shocking allows the algae to build resistance.
- Not cleaning your filter: A dirty filter re-introduces algae into the pool.
- Damaging your equipment: Bypassing your UV system and removing your automatic cleaner are crucial.
- Ignoring local regulations: Austin has specific regulations regarding pool water discharge. Check with Austin Water before draining your pool.
Finally, prevention is key. Regular maintenance, including brushing, vacuuming, and water testing, can prevent algae blooms from occurring in the first place. Consider using a pool cover to reduce sunlight exposure and evaporation. And remember, a little bit of prevention goes a long way in keeping your Austin pool sparkling clean and your equipment in top shape. Don’t let the green monster win!