Austin Algae: Pool Sunscreen Breeding Laser Rot?
By Franklin Everett ShawThe turquoise shimmer of your Austin pool can quickly turn murky green if you’re not careful. It’s not just about aesthetics; that green hue often signals a cocktail of algae fueled by an unexpected source: sunscreen. We’re talking about “pool algae sunscreen breeding laser rot” – a catchy, if not entirely scientific, term for sunscreen-enhanced algae blooms. Let’s dive into how to identify, prevent, and safely remove this nuisance from your backyard oasis.
First, let’s understand the enemy. Sunscreen, while vital for protecting our skin, contains organic compounds like avobenzone and oxybenzone. These compounds, when washed off in the pool, act as food for algae. Austin’s intense sun then supercharges the algae growth, leading to rapid blooms.
Identifying “pool algae sunscreen breeding laser rot” isn’t rocket science. Look for these telltale signs:
- A slimy, green or yellowish-green film on pool surfaces.
- Cloudy water, even after shocking.
- A noticeable sunscreen smell, even when no one is actively applying it.
- Increased chlorine demand – you’re adding more chlorine, but it’s disappearing faster.
Now, for prevention. This is where you can really make a difference.
- Shower Power: Insist that everyone showers before entering the pool. This washes off a significant amount of sunscreen.
- Sunscreen Selection: Opt for mineral-based sunscreens containing zinc oxide or titanium dioxide. These are less likely to feed algae. Look for “reef-safe” options; they’re generally better for your pool too.
- Pool Covers: Use a pool cover when the pool isn’t in use. This reduces sunlight exposure, hindering algae growth.
- Regular Cleaning: Vacuum and brush your pool regularly, paying special attention to corners and steps where algae tend to accumulate.
What if the algae has already taken hold? Don’t panic. Here’s a step-by-step guide to removing it, tailored for Austin pools:
Test Your Water: Use a reliable test kit to check your pH, alkalinity, and chlorine levels. Adjust as needed. Ideal ranges are: pH 7.2-7.8, Alkalinity 80-120 ppm, Chlorine 1-3 ppm. Leslie’s Pool Supplies on Research Blvd. offers free water testing if you’re unsure.
Brush Thoroughly: Vigorously brush all pool surfaces, dislodging as much algae as possible. A stiff-bristled brush is best for gunite pools, while a softer brush is recommended for fiberglass to avoid scratching.
Shock the Pool: This is crucial. Use a calcium hypochlorite shock (chlorine shock). Follow the manufacturer’s instructions for dosage, but generally, you’ll need a higher dose than usual for an algae bloom. Add the shock in the evening to avoid sunlight degradation.
Algaecide Application: Choose an algaecide specifically designed for algae blooms. In Travis County, ensure the algaecide is EPA-registered and legal for use. Copper-based algaecides are effective, but be cautious as they can stain pool surfaces, especially if your water has high mineral content. Polyquat algaecides are a gentler alternative. Follow the product instructions carefully.
Filtration is Key: Run your pool filter continuously for 24-48 hours after shocking and adding algaecide. Backwash or clean your filter as needed to remove dead algae.
Vacuum to Waste: After filtration, vacuum the pool to waste. This removes the dead algae and debris without recirculating it through your filter. If you don’t have a “waste” setting on your filter, you can carefully vacuum to the filter, but be prepared to clean the filter frequently.
Re-Test and Adjust: After the cleaning process, re-test your water and adjust the chemicals as needed to maintain proper balance.
DIY cleaning methods are generally safe for gunite and fiberglass pools, but always test any cleaning solution in a small, inconspicuous area first. For stubborn stains, a diluted mixture of muriatic acid can be used on gunite, but always wear protective gear and follow safety precautions. Fiberglass is more delicate; use a specialized fiberglass cleaner.
Common mistakes developers face (and how to avoid them):
- Under-Shocking: Not using enough shock to kill the algae effectively. Use a higher dose than you think you need.
- Ignoring Water Balance: Neglecting to balance the water chemistry before shocking. Unbalanced water reduces the effectiveness of the shock.
- Skipping Brushing: Failing to thoroughly brush the pool surfaces. Brushing dislodges the algae, allowing the shock and algaecide to penetrate better.
- Not Cleaning the Filter: Neglecting to backwash or clean the filter after treatment. A clogged filter reduces its effectiveness and can reintroduce algae back into the pool.
- Using the Wrong Algaecide: Choosing an algaecide that’s not effective against the specific type of algae in your pool. Identify the algae type (green, yellow, black) and choose an appropriate algaecide.
Prolonged exposure to algae-infested pool water can pose health risks. These include:
- Skin Irritation: Rashes, itching, and other skin irritations.
- Eye Irritation: Redness, burning, and blurred vision.
- Respiratory Problems: Inhaling algae spores can trigger asthma or allergies.
- Gastrointestinal Issues: Swallowing contaminated water can cause nausea, vomiting, and diarrhea.
Testing for sunscreen-related contaminants is tricky. Standard pool test kits don’t directly measure sunscreen chemicals. However, you can infer their presence by:
- Monitoring Chlorine Demand: A rapid decrease in chlorine levels suggests the presence of organic contaminants like sunscreen.
- Observing Algae Growth: Rapid algae growth, even with proper chlorine levels, can indicate sunscreen contamination.
- Using Specialized Test Strips: Some companies offer test strips that can detect organic contaminants in pool water, although their accuracy can vary.
For more precise testing, you can send a water sample to a specialized laboratory. These labs can analyze the water for specific sunscreen chemicals. APEC Water in City of Industry, CA, is one such lab that offers comprehensive water testing services. While sending a sample to California might seem odd, their detailed analysis can provide valuable insights into the specific contaminants in your Austin pool.
Remember, maintaining a healthy pool is an ongoing process. Regular testing, proper chemical balance, and proactive prevention are key to keeping your Austin pool sparkling clean and free from “pool algae sunscreen breeding laser rot.” Enjoy your swim!