Austin Asthma: Is City Water Crashing Summer Lungs?

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
October 12, 2025

The air in Austin during the summer can feel thick, heavy, and almost…prickly. It’s not just the heat; for many, it’s a trigger for asthma and other respiratory issues. While allergies get a lot of the blame, there’s a silent culprit lurking in our homes: our tap water.

Austin’s water, like many municipalities, uses chloramines to disinfect the water supply. While effective at killing bacteria, chloramines can off-gas from tap water into the air, especially in warm, humid environments. This off-gassing can irritate the respiratory system, exacerbating asthma symptoms.

Is your home contributing to your summer suffering? Let’s find out.

Understanding Chloramines: The Invisible Irritant

Chloramines are a combination of chlorine and ammonia. They’re used as a disinfectant because they’re longer-lasting than chlorine alone and produce fewer disinfection byproducts. However, they still have drawbacks.

The primary issue is that chloramines can vaporize from water, especially when heated (think showers, dishwashers, or even just leaving a glass of water sitting out). This vapor then enters the air we breathe. For individuals with asthma or other respiratory sensitivities, even low levels of chloramine exposure can trigger symptoms like:

  • Coughing
  • Wheezing
  • Shortness of breath
  • Chest tightness
  • Eye irritation
  • Skin irritation

The problem is compounded in Austin’s hot and humid summers. Higher temperatures increase the rate of off-gassing, and humidity keeps the chloramines lingering in the air.

Testing Your Austin Water for Chloramines: A Step-by-Step Guide

You don’t have to live in fear of your tap water. Testing for chloramines is relatively simple and inexpensive. Here’s how:

  1. Gather Your Supplies: You’ll need a chloramine test kit. These are readily available online (Amazon, Home Depot) or at local pool supply stores. Make sure the kit specifically tests for total chloramines, not just free chlorine. A good kit will cost between $20-$40. LaMotte and Hach are reputable brands. You’ll also need a clean glass or container to collect your water sample.

  2. Collect Your Sample: The most accurate reading comes from a first-draw sample. This means collecting water that has been sitting in your pipes overnight. First thing in the morning, before using any water, fill your clean glass or container directly from your kitchen tap. Let the water run for a few seconds to clear any stagnant water in the faucet itself.

  3. Perform the Test: Follow the instructions provided with your chloramine test kit exactly. These kits typically involve adding a reagent to the water sample and comparing the resulting color to a chart. Pay close attention to the timing instructions, as the color change can be rapid.

  4. Interpret Your Results: The test kit will provide a reading in parts per million (ppm) or milligrams per liter (mg/L). Austin Water reports that their chloramine levels typically range from 1.0 to 4.0 mg/L. However, even levels within this range can be problematic for sensitive individuals. Anything above 2.0 mg/L warrants further investigation and mitigation strategies.

  5. Repeat the Test (Optional): For a more comprehensive assessment, test water from different taps in your home (bathroom, shower) and at different times of day. This can help identify specific sources of higher chloramine levels.

Common Mistakes and Pitfalls:

  • Using Expired Test Kits: Reagents degrade over time, leading to inaccurate results. Always check the expiration date before using a test kit.
  • Contaminating the Sample: Ensure your glass or container is thoroughly clean and free of any soap residue or other contaminants.
  • Ignoring the Instructions: Each test kit is slightly different. Read and follow the instructions carefully to ensure accurate results.
  • Testing Hot Water: Hot water will off-gas chloramines, skewing your results. Always test cold water samples.

Mitigating Chloramine Exposure in Your Austin Home: Practical Solutions

If your water tests positive for elevated chloramine levels, don’t despair. Several effective strategies can help reduce your exposure:

  1. Whole-House Carbon Filtration: This is the most comprehensive solution. A whole-house filter removes chloramines from all the water entering your home. Look for filters specifically certified to remove chloramines, such as those using catalytic carbon. These filters are more effective than standard carbon filters. Expect to pay between $500-$2000 for a professionally installed system.

  2. Point-of-Use Filters: For a more targeted approach, install filters at specific taps, such as your kitchen sink or showerhead. Again, choose filters certified for chloramine removal. Shower filters are particularly important, as hot showers release significant amounts of chloramines into the air.

  3. Activated Carbon Pitchers: While less effective than whole-house or point-of-use filters, activated carbon pitchers (like Brita or PUR) can help reduce chloramine levels in drinking water. However, they require frequent filter changes.

  4. Improve Home Ventilation: Proper ventilation helps remove chloramine vapors from the air. Open windows and doors whenever possible, especially after showering or running the dishwasher. Use exhaust fans in bathrooms and kitchens. Consider investing in an air purifier with a carbon filter to further reduce airborne chloramines.

  5. Let Water Sit Before Use: Allowing water to sit for a period of time before use can help reduce chloramine levels through off-gassing. Fill a pitcher of water and let it sit for 24 hours before drinking. This is a simple, low-cost solution, but it’s not as effective as filtration.

Real-World Application: The Zilker Park Case Study (Hypothetical)

Imagine a family living near Zilker Park in Austin. They enjoy spending time outdoors, but their child’s asthma symptoms worsen during the summer. They initially attribute it to pollen and air pollution. However, after learning about chloramines, they test their home water and find elevated levels.

They install a whole-house carbon filter and notice a significant improvement in their child’s asthma symptoms. They also start using a shower filter and improve ventilation in their home. By addressing the chloramine issue, they create a healthier indoor environment and allow their child to enjoy the summer months without constant respiratory distress.

The Long-Term Impact: Protecting Your Respiratory Health

Addressing chloramine exposure is not just about immediate symptom relief. Long-term exposure to these chemicals can have cumulative effects on respiratory health. By taking proactive steps to mitigate your exposure, you’re investing in your long-term well-being.

Beyond Chloramines: Other Potential Indoor Air Pollutants in Austin

While chloramines are a significant concern, it’s important to be aware of other potential indoor air pollutants in Austin:

  • Mold: Austin’s humid climate is conducive to mold growth. Regularly inspect your home for signs of mold and address any issues promptly.
  • Volatile Organic Compounds (VOCs): VOCs are emitted from a variety of sources, including paints, cleaning products, and furniture. Choose low-VOC products whenever possible and ensure adequate ventilation.
  • Radon: Radon is a naturally occurring radioactive gas that can seep into homes from the soil. Test your home for radon and mitigate if necessary.

Conclusion: Take Control of Your Indoor Air Quality

Don’t let Austin’s water supply compromise your respiratory health. By understanding the potential risks of chloramines, testing your water, and implementing effective mitigation strategies, you can create a healthier and more comfortable indoor environment for yourself and your family. Take control of your indoor air quality and breathe easier this summer.

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.