**Austin Baths: Texas Tap Ruining Summer Lasers?**
By Franklin Everett ShawImagine finally ditching the razor, envisioning smooth, hair-free skin thanks to that sleek new laser hair removal device. But then, reality hits. The device seems less effective than advertised, and you’re left wondering if you’re doing something wrong. If you live in Austin, Texas, the answer might be lurking in your tap water.
Austin’s water, while perfectly safe to drink, is known for its hardness and relatively high chlorine levels. This isn’t just a matter of taste; it can significantly impact the performance and lifespan of your at-home laser hair removal device. Let’s dive into why and, more importantly, what you can do about it.
Hard water contains high concentrations of minerals like calcium and magnesium. These minerals can leave deposits on the laser head, reducing its efficiency and potentially causing it to overheat. Think of it like trying to shine a flashlight through a dirty window – the light is still there, but it’s not as bright or focused.
Chlorine, added to disinfect the water, can also be problematic. While it’s great for killing bacteria, it can corrode the delicate components of your device over time, especially if you’re using tap water to clean it. This corrosion can lead to malfunctions and a shorter lifespan for your investment.
So, what are Austin residents experiencing? Many report needing more treatments than expected to achieve desired results. Some have even noticed their devices malfunctioning or breaking down sooner than anticipated. These aren’t isolated incidents; they’re a pattern pointing to the impact of Austin’s water quality.
Let’s get practical. The first line of defense is water filtration.
- For device cleaning: Never, ever use tap water directly on your laser hair removal device. Instead, opt for distilled water. It’s readily available at most grocery stores and pharmacies. Distilled water is free of minerals and chlorine, making it the perfect cleaning agent.
- For skin preparation: Before using your device, you need to clean the area you’ll be treating. While you can use tap water for this, consider investing in a water filter pitcher or a whole-house filtration system. A simple filter pitcher can significantly reduce the hardness and chlorine levels in your water, minimizing mineral buildup on your skin and device.
A common mistake is assuming that any water filter will do. Not all filters are created equal. Look for filters specifically designed to remove hardness and chlorine. Activated carbon filters are generally effective at removing chlorine, while ion exchange filters can tackle hardness.
Another pitfall is neglecting to clean the device properly after each use. Always wipe down the laser head with a soft, dry cloth after each treatment. For a deeper clean, use a cotton swab dampened with distilled water.
What if filtration isn’t enough, or you’re looking for alternatives? Consider these options:
- Professional laser hair removal: While more expensive upfront, professional treatments often use more powerful lasers and are performed in a controlled environment, eliminating the water quality factor.
- Electrolysis: This method uses an electric current to destroy hair follicles and is generally considered permanent. It’s not affected by water quality.
- Other hair removal methods: Waxing, sugaring, and threading are all viable alternatives that don’t rely on electronic devices and are therefore immune to the effects of hard water and chlorine.
Understanding Austin’s water quality is crucial. The City of Austin publishes an annual Water Quality Report, also known as a Consumer Confidence Report (CCR). This report provides detailed information about the source of your water, the contaminants detected, and the levels at which they were found.
You can usually find the report on the City of Austin Utilities website. Pay close attention to the hardness and chlorine levels. The report will also outline any potential health risks associated with the water and provide tips for improving water quality.
Navigating the report can be tricky. Look for sections labeled “Water Quality Data” or “Detected Contaminants.” Hardness is typically measured in grains per gallon (gpg) or milligrams per liter (mg/L). A reading above 7 gpg or 120 mg/L is generally considered hard. Chlorine levels are usually measured in parts per million (ppm). The EPA sets a maximum residual disinfectant level (MRDL) for chlorine, so check if Austin’s levels are within the acceptable range.
Don’t just skim the report; take the time to understand the data and how it might affect your health and your devices. If you have concerns, contact Austin Water directly. They can provide additional information and answer your questions.
Let’s say you live in the 78704 zip code, known for its older infrastructure. You might find that your water hardness is slightly higher than in newer developments further north. This is because older pipes can leach minerals into the water. In this case, a more robust filtration system might be necessary.
Or, perhaps you live near Lake Travis, one of Austin’s primary water sources. During periods of drought, the lake’s water level drops, which can concentrate minerals and increase hardness. Being aware of these local variations can help you tailor your water filtration strategy.
The key takeaway is this: don’t assume that your laser hair removal device is faulty if you’re not seeing the results you expect. Consider the water quality in Austin. By taking proactive steps to filter your water, clean your device properly, and understand Austin’s water quality reports, you can protect your investment and achieve the smooth, hair-free skin you desire. It’s not just about buying a device; it’s about understanding your environment and adapting your approach accordingly.