**Austin Pools: Is Copper Crashing Collagen Lasers?**

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
November 15, 2025

The shimmering waters of Barton Springs beckon on a sweltering Austin day. But for those of us investing in laser skin treatments like Fraxel to combat the Texas sun’s relentless aging effects, a nagging question arises: is our pool time sabotaging our skincare investment? The answer, unfortunately, is more complex than a simple yes or no, especially when considering the common use of copper-based algaecides in Austin pools.

The problem isn’t just chlorine; it’s the copper. Many Austin homeowners and public pools rely on copper-based algaecides to keep their water crystal clear. While effective at controlling algae, copper ions can interact negatively with skin, particularly skin that’s been recently treated with collagen-boosting lasers like Fraxel.

Here’s why: Fraxel and similar treatments create controlled micro-injuries in the skin, stimulating collagen production. This process leaves the skin more vulnerable and absorbent. Copper, present in pool water, can then be absorbed more readily.

What are the risks? Copper can potentially interfere with the healing process after laser treatments. It can also lead to:

  • Discoloration: Copper can cause a bluish-green tint on the skin, especially in areas that have been recently lasered. This is more likely in individuals with lighter skin tones.
  • Increased Sensitivity: Copper can exacerbate skin sensitivity, leading to redness, itching, and irritation, particularly in the days following a Fraxel treatment.
  • Reduced Efficacy: While not definitively proven, some dermatologists believe that copper exposure could potentially hinder the collagen-building process initiated by laser treatments, diminishing the overall results.

So, what’s an Austin resident to do? Give up swimming altogether? Absolutely not. Here’s a practical guide to minimizing the risks and protecting your skin and your investment:

1. Timing is Everything:

  • The Two-Week Rule: Ideally, avoid swimming in pools treated with copper-based algaecides for at least two weeks after your Fraxel treatment. This allows the skin to heal significantly and reduces its vulnerability to copper absorption.
  • Pre-Treatment Prep: Consider avoiding copper-treated pools for a week before your treatment as well. This minimizes the copper load in your skin beforehand.

2. Skincare Savvy:

  • Barrier Creams: Before entering the pool, apply a thick layer of a barrier cream containing ingredients like dimethicone or petrolatum. These create a physical barrier, reducing copper absorption. A good example is CeraVe Healing Ointment.
  • Immediate Rinse: After swimming, rinse your skin thoroughly with fresh, clean water. Don’t just towel off; actively wash away any residual pool water.
  • Gentle Cleansing: Use a gentle, fragrance-free cleanser to remove any remaining copper or chlorine. Avoid harsh soaps or scrubs that can further irritate the skin. Cetaphil Gentle Skin Cleanser is a reliable choice.
  • Antioxidant Serums: Incorporate an antioxidant serum containing Vitamin C or E into your post-swim skincare routine. These antioxidants can help neutralize free radicals generated by copper and chlorine exposure. Skinceuticals C E Ferulic is a popular, albeit pricey, option. A more affordable alternative is Mad Hippie Vitamin C Serum.
  • Hydration is Key: Laser treatments and pool water can both be drying. Use a rich, hydrating moisturizer to replenish your skin’s moisture barrier.

3. Pool Maintenance Matters (If You Own a Pool):

  • Consider Alternatives: Explore alternative algaecide options that don’t rely on copper. Enzyme-based algaecides or phosphate removers can be effective alternatives, though they may require more frequent application.
  • Maintain Proper Chemistry: Ensure your pool’s pH and alkalinity are properly balanced. Imbalances can exacerbate the effects of copper on the skin.
  • Regular Testing: Regularly test your pool water for copper levels. If levels are high, consider using a metal sequestrant to bind the copper and prevent it from interacting with your skin.
  • Saltwater Systems: Consider switching to a saltwater chlorination system. While saltwater pools still contain chlorine, they generally require fewer harsh chemicals, including copper-based algaecides.

4. Know Your Pool:

  • Ask Questions: If you’re swimming in a public pool or a friend’s pool, don’t hesitate to ask about their pool maintenance practices. Knowing whether they use copper-based algaecides is crucial.
  • Observe: Look for signs of copper staining on pool surfaces, such as greenish-blue discoloration around drains or fittings. This can indicate high copper levels.

Common Pitfalls and How to Avoid Them:

  • Ignoring the Instructions: Many people underestimate the importance of following their dermatologist’s post-laser treatment instructions. Adhering to these guidelines is crucial for optimal healing and minimizing complications.
  • Assuming All Pools Are the Same: Not all pools are created equal. The chemical composition of pool water can vary significantly depending on the maintenance practices employed.
  • Over-Exfoliating: Avoid using harsh exfoliants or scrubs in the days following a laser treatment. This can further irritate the skin and increase its vulnerability to copper absorption.
  • Skipping Sunscreen: Laser treatments make your skin more sensitive to the sun. Always wear a broad-spectrum sunscreen with an SPF of 30 or higher, even on cloudy days. EltaMD UV Clear Broad-Spectrum SPF 46 is a dermatologist-recommended option.

Real-World Scenario: The Zilker Park Dilemma

Imagine you’re an Austin resident who just had a Fraxel treatment and planned a relaxing afternoon at Zilker Park, culminating in a dip in Barton Springs Pool. Barton Springs, while naturally fed, still undergoes some chemical treatment. Before diving in, consider:

  • Recent Rainfall: Heavy rainfall can affect the pool’s chemistry and potentially increase copper runoff from surrounding areas. Check the City of Austin’s Parks and Recreation Department website for any water quality advisories.
  • Crowd Levels: Higher bather loads can necessitate increased chemical treatments, potentially increasing copper levels.
  • Post-Swim Routine: If you do decide to swim, be extra diligent with your post-swim skincare routine, including a thorough rinse, gentle cleansing, and application of an antioxidant serum and moisturizer.

Ultimately, enjoying Austin’s vibrant pool scene after a Fraxel treatment requires a proactive approach. By understanding the potential risks of copper-based algaecides and implementing these practical strategies, you can protect your skin, safeguard your investment, and continue to enjoy the refreshing waters of Austin. Don’t let fear keep you from the pool; just be informed and prepared.

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.