**Austin Showers: Tap Water Killing Filtered Guts?**

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
September 17, 2025

Is your shower turning your Austin oasis into a source of gut-wrenching anxiety? You meticulously filter your drinking water, but what about the water cascading over you every morning? The truth is, chlorine and chloramine, disinfectants used by Austin Water, can wreak havoc on your gut microbiome even when absorbed through the skin and inhaled during a shower. This is especially concerning for those with sensitive systems or pre-existing gut issues. Let’s dive into how to test your shower water right here in Austin, and what you can do to protect your gut health.

First, let’s understand the enemy. Austin Water uses both chlorine and chloramine to disinfect our water supply. While effective at killing harmful bacteria, these chemicals can also disrupt the delicate balance of bacteria in your gut. This disruption, known as dysbiosis, can lead to a host of problems, including bloating, gas, weakened immunity, and even skin conditions.

So, how do you know if your shower water is a problem? You have a few options, ranging from DIY tests to professional lab analysis.

DIY Testing: A Quick and Dirty Check

While not as precise as lab tests, DIY kits offer a quick and affordable way to get a general idea of chlorine and chloramine levels in your shower water. You can find these kits at most hardware stores in Austin, like Lowe’s on Ben White Boulevard or Home Depot on Research Boulevard. Look for kits specifically designed to test for both chlorine and chloramine.

Here’s a step-by-step guide:

  1. Gather your supplies: You’ll need the test kit, a clean glass or container, and a timer.
  2. Run the shower: Let the shower run for a few minutes to flush out any stagnant water in the pipes.
  3. Collect the sample: Fill the glass or container with shower water.
  4. Follow the kit instructions: Each kit will have specific instructions, but generally, you’ll add a reagent to the water sample and compare the color change to a chart provided in the kit.
  5. Record your results: Note the chlorine and chloramine levels indicated by the color change.

Interpreting the Results:

Most DIY kits will give you a range, such as “low,” “medium,” or “high.” Even a “low” reading might be concerning if you’re particularly sensitive. Remember, these kits are not as accurate as lab tests, so consider them a starting point.

The Pitfalls of DIY Testing:

  • Accuracy: DIY kits are prone to inaccuracies due to user error or the quality of the reagents.
  • Limited Scope: They only test for a limited number of contaminants.
  • Subjectivity: Color interpretation can be subjective.

Professional Lab Testing: The Gold Standard

For a more comprehensive and accurate analysis, consider sending a sample of your shower water to a certified lab. Several labs offer water testing services in Austin, or you can mail a sample to a national lab.

Here’s how to go about it:

  1. Find a certified lab: Look for a lab certified by the EPA or your state’s environmental agency. In Austin, you can check with the Texas Commission on Environmental Quality (TCEQ) for a list of certified labs.
  2. Order a test kit: Most labs will send you a kit with specific instructions and a sterile container for collecting the sample.
  3. Collect the sample: Follow the lab’s instructions carefully. This usually involves running the shower for a specific amount of time and collecting the sample in the provided container.
  4. Ship the sample: Pack the sample according to the lab’s instructions and ship it to the lab as soon as possible.
  5. Receive the results: The lab will send you a detailed report of the contaminants found in your water, including chlorine and chloramine levels.

Understanding Austin’s Water Treatment and Its Impact on Filter Choices

Austin Water’s treatment process can influence your choice of shower filter. Because they use both chlorine and chloramine, you need a filter specifically designed to remove both. Many standard chlorine filters won’t effectively remove chloramine.

Shower Filters: Your Gut’s Best Friend

If your testing reveals elevated levels of chlorine or chloramine, a shower filter is a must. Look for filters certified to NSF/ANSI Standard 177 for chlorine reduction. This certification ensures that the filter has been tested and proven to remove chlorine effectively.

Installation: A Step-by-Step Guide

Installing a shower filter is usually a simple DIY project.

  1. Choose your filter: Select a filter that fits your showerhead and meets your needs. Options include:
    • Showerhead filters: These replace your existing showerhead with one that has a built-in filter.
    • Inline filters: These attach between your shower arm and showerhead.
  2. Gather your tools: You’ll likely need a wrench and Teflon tape.
  3. Remove your old showerhead (if applicable): Use a wrench to loosen the connection and remove the old showerhead.
  4. Apply Teflon tape: Wrap Teflon tape around the threads of the shower arm to create a watertight seal.
  5. Install the filter: Follow the manufacturer’s instructions to attach the filter to the shower arm.
  6. Attach the showerhead: If you’re using an inline filter, attach your showerhead to the filter.
  7. Test for leaks: Turn on the shower and check for any leaks. Tighten the connections if necessary.

Common Mistakes and How to Avoid Them:

  • Not using Teflon tape: This can lead to leaks.
  • Overtightening the connections: This can damage the filter or shower arm.
  • Forgetting to flush the filter: Most filters require you to flush them with water for a few minutes before using them for the first time.
  • Not replacing the filter cartridge regularly: Filter cartridges have a limited lifespan and need to be replaced according to the manufacturer’s instructions.

Specific Austin Resources:

  • Austin Water: Check their website for information about water quality and treatment processes.
  • Local Hardware Stores: Lowe’s, Home Depot, and Ace Hardware carry a variety of shower filters and water testing kits.
  • Plumbers: If you’re uncomfortable installing a shower filter yourself, you can hire a local plumber.

Beyond the Filter: Other Gut-Friendly Shower Habits

While a shower filter is a great start, there are other things you can do to minimize your exposure to chlorine and chloramine:

  • Shower in cooler water: Hot water can increase the absorption of chemicals through the skin.
  • Limit shower time: The longer you shower, the more exposure you have.
  • Ventilate the bathroom: Open a window or turn on the exhaust fan to reduce the concentration of chemicals in the air.
  • Consider a Vitamin C shower filter: Vitamin C neutralizes chlorine and chloramine.

Taking control of your shower water quality is an investment in your gut health and overall well-being. By testing your water, choosing the right filter, and adopting gut-friendly shower habits, you can transform your Austin shower from a potential threat into a truly refreshing and healthy experience. Don’t let those chemicals win!

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.