**Boise Lasers: City Water Harming Summer Savings?**
By Franklin Everett ShawThat persistent white crust on your swamp cooler pads isn’t just unsightly; it’s robbing you blind. Boise’s notoriously hard water is the culprit, and ignoring it will turn your energy-efficient cooler into an expensive paperweight.
Boise, Idaho, nestled in the Treasure Valley, boasts stunning landscapes and a vibrant community. But beneath the surface lies a hidden enemy for homeowners relying on evaporative coolers: the city’s exceptionally hard water. This isn’t just a minor inconvenience; it’s a silent killer of swamp cooler efficiency, leading to increased energy bills and premature system failure.
Boise’s water hardness typically ranges from 180 to 250 parts per million (ppm) of calcium carbonate. Anything above 180 ppm is considered very hard. This high mineral content is due to the city’s water source, primarily groundwater drawn from the aquifer system beneath the valley, which naturally contains dissolved minerals like calcium and magnesium.
The problem arises when this hard water is used in evaporative coolers. As water evaporates to cool the air, the minerals are left behind, accumulating on the cooler pads and internal components. This mineral buildup, often referred to as “Boise Lasers” due to its sharp, crystalline structure, acts as an insulator, hindering the evaporation process.
- Reduced cooling efficiency: The mineral scale restricts airflow and water absorption, forcing the cooler to work harder to achieve the same cooling effect.
- Increased energy consumption: A struggling cooler draws more power, leading to higher electricity bills, especially during Boise’s scorching summer months.
- Component damage: Mineral deposits can clog water distribution lines, corrode metal parts, and damage the pump, ultimately leading to costly repairs or complete system failure.
- Unpleasant odors: The buildup can also harbor bacteria and algae, resulting in musty or foul odors circulating through your home.
Identifying “Boise Lasers” is crucial for proactive maintenance. Look for these telltale signs:
- White, crusty deposits on the cooler pads, especially on the bottom edges.
- Reduced airflow from the cooler, even when the fan is on high.
- A noticeable increase in your electricity bill during cooling season.
- A musty or unpleasant odor emanating from the cooler.
- Visible mineral buildup on the cooler’s internal components, such as the water distribution lines and pump.
Fortunately, Boise homeowners can combat the effects of hard water with several DIY strategies and readily available products.
Regular Pad Cleaning: This is the most basic, yet essential, step. At least once a month, shut off the water supply and power to the cooler. Remove the pads and thoroughly rinse them with a garden hose. Use a soft brush to gently scrub away any visible mineral deposits. For stubborn buildup, soak the pads in a solution of equal parts white vinegar and water for a few hours before rinsing.
Water Softener Integration: Consider installing a whole-house water softener. While a significant investment, it will protect all your appliances from hard water damage, including your swamp cooler, washing machine, and water heater. Look for systems specifically designed for Boise’s water hardness levels.
Evaporative Cooler Water Treatments: Several commercially available water treatments are designed to prevent mineral buildup in swamp coolers. These treatments typically contain chemicals that bind to the minerals, preventing them from forming scale. Follow the manufacturer’s instructions carefully when using these products. A popular option is “CLR Evaporative Cooler Treatment.”
Bleed-Off Kit Installation: A bleed-off kit continuously drains a small amount of water from the cooler, preventing the concentration of minerals from reaching critical levels. This is a relatively inexpensive and easy-to-install solution. Ensure the bleed-off line is properly routed to a drain to avoid water damage.
Vinegar Flush: Periodically flushing your cooler with vinegar can help dissolve existing mineral deposits. Mix a gallon of white vinegar with several gallons of water and run the cooler with this solution for a few hours. Then, drain the vinegar solution and flush the cooler with fresh water.
Choosing the Right Cooler Pads: Opt for high-quality cooler pads designed for hard water conditions. Some pads are treated with anti-scaling agents or are made from materials that are less prone to mineral buildup. Look for pads specifically marketed for use in areas with hard water.
Common Mistakes and Pitfalls:
- Neglecting Regular Maintenance: The biggest mistake is simply ignoring the problem. Regular cleaning and preventative measures are crucial for extending the life of your cooler.
- Using Harsh Chemicals: Avoid using harsh chemicals or abrasive cleaners on your cooler pads, as they can damage the pads and reduce their effectiveness.
- Overlooking the Water Distribution System: Mineral buildup can also clog the water distribution lines, preventing water from reaching all areas of the pads. Periodically inspect and clean these lines.
- Ignoring the Odor: A musty or foul odor indicates bacterial growth, which can be addressed with a bleach solution (follow manufacturer’s instructions carefully).
- Waiting Until It’s Too Late: Don’t wait until your cooler completely fails before taking action. Proactive maintenance will save you money and headaches in the long run.
Real-World Scenario:
Consider the case of Sarah, a homeowner in the North End of Boise. She noticed her energy bills were steadily increasing each summer, despite using her swamp cooler as usual. Upon inspection, she discovered thick mineral deposits on her cooler pads and a significant reduction in airflow. After implementing a regular cleaning schedule, installing a bleed-off kit, and using a water treatment product, Sarah saw a noticeable decrease in her energy bills and a significant improvement in her cooler’s performance.
By understanding the unique challenges posed by Boise’s hard water and implementing these DIY strategies, you can protect your evaporative cooler, save money on energy bills, and enjoy a cool and comfortable home throughout the summer. Don’t let “Boise Lasers” win!