**Boise Builds: Are New Homes Hiding Radon Lungs?**

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
October 5, 2025

The air in your Boise home might be hiding a silent threat. It’s not a monster under the bed, but an invisible, odorless gas called radon. And if you’re a homeowner in Boise, especially in a newly built house, you need to know how to test for it and what to do if you find it.

Radon is a naturally occurring radioactive gas that comes from the breakdown of uranium in soil, rock, and water. It can seep into homes through cracks in foundations, walls, and other openings. While radon is harmless outdoors, it can build up to dangerous levels inside, increasing your risk of lung cancer.

Boise, Idaho, sits atop a geological landscape that makes it particularly susceptible to radon. The Treasure Valley, where Boise is located, has uranium-rich soil, meaning radon is more prevalent here than in many other parts of the country. New construction, while often airtight for energy efficiency, can inadvertently trap radon if proper precautions aren’t taken during building.

So, how do you protect yourself and your family? Let’s dive into the specifics of radon testing and mitigation in Boise.

DIY Radon Testing: A First Step

You can start with a DIY radon test kit. These kits are readily available at hardware stores like Lowe’s on Milwaukee Street or online retailers. They typically include a charcoal canister or alpha track detector that you place in the lowest lived-in level of your home for a specified period, usually 2-7 days.

Follow the instructions precisely. This is crucial for accurate results. Common mistakes include:

  • Opening windows or doors during the test period. Keep your home closed as much as possible to simulate normal living conditions.
  • Placing the test kit near drafts, exterior walls, or in direct sunlight. These factors can skew the results.
  • Not returning the kit to the lab promptly after the test period. Delays can affect the accuracy of the analysis.

Once the testing period is over, you’ll mail the kit to a certified laboratory for analysis. The lab will then send you a report with the radon level in picocuries per liter (pCi/L).

Interpreting Your Results: Boise’s Context

The EPA recommends taking action to mitigate radon if your home’s radon level is 4 pCi/L or higher. However, even levels between 2 pCi/L and 4 pCi/L warrant consideration of mitigation, especially in a high-radon area like Boise.

Remember, Boise’s geological makeup means that even homes in the same neighborhood can have vastly different radon levels. A neighbor’s low reading doesn’t guarantee your home is safe.

If your DIY test reveals elevated radon levels, don’t panic. It’s time to call in the professionals.

Professional Radon Testing: Ensuring Accuracy

A certified radon tester uses specialized equipment and follows strict protocols to ensure accurate results. They can conduct both short-term and long-term tests, providing a more comprehensive assessment of your home’s radon levels.

Short-term tests, like DIY kits, measure radon levels over a few days. Long-term tests, on the other hand, measure radon levels over several months, providing a more accurate picture of your home’s average radon concentration throughout the year. This is especially useful in Boise, where seasonal variations in temperature and soil moisture can affect radon levels.

A professional tester will also be able to identify potential entry points for radon and provide recommendations for mitigation. They understand the nuances of Boise’s soil and building practices, offering tailored solutions.

Radon Mitigation: Protecting Your Home and Family

If your radon levels are above the EPA’s action level, radon mitigation is essential. The most common mitigation method is sub-slab depressurization (SSD). This involves installing a vent pipe and fan system that draws radon gas from beneath the foundation and vents it safely outside.

Here’s a simplified step-by-step overview of the SSD process:

  1. A radon mitigation specialist will assess your home to determine the best location for the vent pipe.
  2. A hole is drilled through the foundation slab, typically in a basement or crawl space.
  3. A PVC pipe is inserted into the hole, creating a suction point.
  4. The pipe is routed to an exterior wall, where a fan is installed to draw radon gas up and out.
  5. The vent pipe extends above the roofline to safely disperse the radon gas.
  6. The system is sealed to prevent radon from re-entering the home.

The cost of radon mitigation in Boise typically ranges from $800 to $2500, depending on the complexity of the installation.

Finding Certified Radon Mitigation Specialists in the Treasure Valley

It’s crucial to hire a certified radon mitigation specialist. Look for professionals certified by the American Association of Radon Scientists and Technologists (AARST) or the National Radon Proficiency Program (NRPP). These certifications ensure that the specialist has the necessary training and expertise to properly mitigate radon in your home.

You can find a list of certified radon professionals in Idaho on the Idaho Department of Environmental Quality’s website. Local companies like Radon Solutions of Idaho and Treasure Valley Radon are good starting points for getting quotes and comparing services.

Challenges and Pitfalls

One common challenge is finding a reputable and qualified mitigation specialist. Don’t just go with the cheapest option. Check their certifications, read online reviews, and ask for references.

Another pitfall is improper installation of the mitigation system. A poorly installed system can be ineffective or even create new problems. Make sure the specialist follows all applicable building codes and EPA guidelines.

Real-World Scenario: New Construction in Meridian, Idaho

Imagine you’ve just moved into a brand-new home in a developing subdivision in Meridian, Idaho, a suburb of Boise. You’re excited about your new house, but you’re also aware of the potential for radon in the area.

You decide to start with a DIY radon test kit. The results come back at 5.2 pCi/L, above the EPA’s action level. You immediately contact a certified radon mitigation specialist.

The specialist assesses your home and recommends an SSD system. They explain that the new construction, while energy-efficient, has created a tightly sealed environment that traps radon gas.

The mitigation system is installed, and a follow-up test confirms that the radon levels have been reduced to below 2 pCi/L. You can now breathe easy, knowing that you’ve protected your family from the dangers of radon.

Actionable Insights for Boise Homeowners

  • Test your home for radon, regardless of its age or location. Don’t assume your home is safe just because your neighbors’ homes have low radon levels.
  • Start with a DIY test kit, but follow up with a professional test if the results are elevated. A professional test provides a more accurate assessment of your home’s radon levels.
  • If your radon levels are above 4 pCi/L, mitigate. Even levels between 2 pCi/L and 4 pCi/L warrant consideration of mitigation, especially in Boise.
  • Hire a certified radon mitigation specialist. Check their certifications, read online reviews, and ask for references.
  • Ensure the mitigation system is properly installed and maintained. A poorly installed system can be ineffective or even create new problems.
  • Retest your home after mitigation to ensure the system is working effectively. Radon levels can fluctuate over time, so it’s important to monitor them regularly.

Protecting your family from radon is a crucial step in maintaining a healthy home in Boise. By understanding the risks, testing your home, and mitigating if necessary, you can breathe easier knowing you’ve taken proactive steps to safeguard your well-being. Don’t delay – take action today!

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.