**Denver Altitude: Is Tap Water Drying Youth Lasers?**

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
October 1, 2025

The quest for flawless skin is a relentless pursuit, often leading us down paths paved with expensive creams and cutting-edge devices. But what if the very water we use to cleanse our faces is sabotaging our efforts, especially when combined with the unique environmental challenges of a city like Denver? It’s a question worth asking, and one that demands a deeper dive.

Denver, Colorado, a city nestled in the Rocky Mountains, presents a unique set of circumstances that can impact skincare and the effectiveness of at-home facial lasers. The high altitude, dry climate, and the composition of Denver’s tap water can all play a role in diminishing the results you expect from your beauty routine. Let’s unpack this.

Denver’s tap water, while meeting federal safety standards, is known for its hardness. Hard water contains high concentrations of minerals like calcium and magnesium. These minerals can react with soaps and cleansers, forming a film on the skin that can clog pores and prevent skincare products from penetrating effectively. This is a problem everywhere, but Denver’s water hardness compounds the issue.

The altitude in Denver, approximately 5,280 feet above sea level (a mile high!), contributes to drier air. This low humidity environment draws moisture from the skin, leading to dehydration and increased sensitivity. This dryness can exacerbate the effects of laser treatments, making the skin more prone to irritation and potentially hindering the healing process.

Now, let’s consider the impact on at-home facial lasers. These devices, which use light energy to target specific skin concerns like wrinkles, acne, or hyperpigmentation, rely on the skin’s ability to absorb and process that energy. If the skin is coated in a mineral film from hard water, or severely dehydrated due to the altitude, the laser’s effectiveness can be significantly reduced. The laser energy might be scattered or blocked, leading to suboptimal results and potentially increasing the risk of adverse reactions.

So, what can a Denver resident do to combat these challenges and maximize the effectiveness of their at-home facial laser? The answer lies in a three-pronged approach: water filtration, skincare adjustments, and optimized laser usage techniques.

First, let’s tackle the water. Investing in a water filtration system is crucial. A whole-house water softener is the most comprehensive solution, removing calcium and magnesium from all the water entering your home. However, this can be a significant investment. A more targeted and affordable option is a shower filter designed to remove hard water minerals. Look for filters that use KDF-55 media, which is particularly effective at removing chlorine and heavy metals in addition to calcium and magnesium. A good example is the AquaBliss High Output Revitalizing Shower Filter. It’s relatively inexpensive and easy to install.

Another option, especially for those renting or on a tight budget, is to use distilled water for cleansing your face. While not ideal for showering, using distilled water for your final rinse after cleansing can help remove any lingering mineral residue. You can find distilled water at most grocery stores in Denver, including King Soopers and Safeway.

Next, let’s address skincare. Hydration is key in Denver’s dry climate. Focus on incorporating humectants, emollients, and occlusives into your skincare routine. Humectants, like hyaluronic acid and glycerin, draw moisture from the air into the skin. Emollients, like shea butter and ceramides, help to soften and smooth the skin. Occlusives, like petrolatum and beeswax, create a barrier that prevents moisture loss.

Specifically, look for serums containing hyaluronic acid. The Ordinary’s Hyaluronic Acid 2% + B5 is a popular and affordable option. Follow this with a moisturizer containing ceramides, such as CeraVe Moisturizing Cream. At night, consider using a facial oil containing squalane or jojoba oil to lock in moisture. Avoid harsh cleansers that can strip the skin of its natural oils. Opt for gentle, hydrating cleansers like Cetaphil Gentle Skin Cleanser or La Roche-Posay Toleriane Hydrating Gentle Cleanser.

After laser treatments, it’s even more important to focus on hydration and soothing ingredients. Look for products containing aloe vera, chamomile, or allantoin to calm any irritation. Avoid using active ingredients like retinoids or AHAs/BHAs for at least a week after treatment, as these can further irritate the skin.

Finally, let’s optimize your laser usage technique. Start with the lowest intensity setting and gradually increase it as your skin tolerates it. Always perform a patch test on a small area of skin before treating your entire face. This will help you assess your skin’s sensitivity and prevent any adverse reactions.

Reduce the frequency of your laser treatments. Given Denver’s dry climate, your skin may need more time to recover between treatments. Instead of using the laser every week, try using it every two weeks or even once a month. Pay close attention to your skin’s response and adjust the frequency accordingly.

Ensure your skin is properly hydrated before and after each treatment. Drink plenty of water and apply a hydrating serum and moisturizer. Avoid using the laser on dry or irritated skin. If your skin is feeling particularly dry, take a break from laser treatments until it recovers.

Clean your laser device regularly according to the manufacturer’s instructions. Mineral buildup from hard water can affect the device’s performance and lifespan. Use distilled water to clean the device and avoid using harsh chemicals or abrasive cleaners.

Common mistakes Denver residents make when using at-home facial lasers include:

  • Using the laser too frequently, leading to over-exfoliation and irritation.
  • Not hydrating the skin adequately before and after treatment.
  • Using the laser on dry or irritated skin.
  • Not cleaning the laser device regularly, leading to mineral buildup and reduced performance.
  • Using too high of an intensity setting, causing burns or hyperpigmentation.

To overcome these challenges, remember to prioritize hydration, start with a low intensity setting, reduce the frequency of treatments, and clean your laser device regularly. By addressing the unique challenges posed by Denver’s tap water, high altitude, and dry climate, you can maximize the effectiveness of your at-home facial laser and achieve the radiant, healthy skin you desire. Don’t let Denver’s environment dictate your skincare success; take control and adapt your routine for optimal results.

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.