Denver Drywall: Altitude AC Hiding Deadly Mold?
By Franklin Everett ShawThe musty smell hit me the moment I opened the closet. It wasn’t overpowering, but it was definitely there. Living in Denver, I knew humidity wasn’t usually the culprit, but we’d been running the AC non-stop with those crazy temperature swings. Could it be mold? The thought sent a shiver down my spine.
Denver’s unique climate, with its high altitude and dry air punctuated by sudden humidity spikes, creates a perfect storm for condensation, especially when running air conditioning. This condensation can easily lead to mold growth behind drywall, often undetected until it becomes a bigger problem. So, how do you, as a Denver homeowner, tackle this potential issue?
First, visual inspection is key. Look for discoloration on walls, ceilings, and around windows, particularly in areas where condensation might form, like near AC vents or exterior walls. Pay close attention to bathrooms and kitchens, as these areas are naturally more humid.
- Check for water stains.
- Look for bubbling or peeling paint.
- Examine grout lines in bathrooms for dark spots.
Don’t just rely on your eyes. That musty odor is a strong indicator, even if you can’t see anything. Try to pinpoint the source of the smell. Is it stronger in a particular room or near a specific wall?
If you suspect mold, a simple DIY test can provide initial confirmation. You can purchase mold test kits at most hardware stores, including Home Depot and Lowe’s in the Denver area. These kits typically involve collecting a sample from a suspected moldy surface using a swab or tape strip and sending it to a lab for analysis.
However, be aware of the limitations. These tests can tell you if mold is present, but they don’t always identify the type of mold or the extent of the problem. Also, surface sampling might miss hidden mold growth behind walls.
A more accurate, though slightly more involved, DIY method involves a bleach test. Mix a solution of one part bleach to 16 parts water. Apply a small amount to the suspected moldy area. If the dark spot lightens or disappears after a few minutes, it’s likely mold. If it stays the same, it’s probably just dirt or mildew. Always wear gloves and eye protection when working with bleach.
If you confirm mold growth, the next step is remediation. For small areas (less than 10 square feet), you can often handle the cleanup yourself.
Here’s a step-by-step guide:
- Contain the area: Seal off the affected room with plastic sheeting to prevent mold spores from spreading.
- Ventilate: Open windows and use a fan to circulate air.
- Protect yourself: Wear gloves, a mask (N-95 or higher), and eye protection.
- Clean the mold: Use a solution of mild detergent and water to scrub the affected area. For porous surfaces like drywall, you may need to cut out and replace the damaged section.
- Disinfect: After cleaning, apply a mold-killing disinfectant.
- Dry thoroughly: Use a dehumidifier to dry the area completely. This is crucial in Denver’s climate, as residual moisture can lead to regrowth.
Common mistakes developers make (and how to avoid them):
- Ignoring the source of the moisture: Simply cleaning the mold without addressing the underlying cause (e.g., condensation, leaks) will only lead to recurrence.
- Using the wrong cleaning products: Bleach alone is not always effective on porous surfaces. Use a detergent-based cleaner first, followed by a disinfectant.
- Not properly containing the area: This can spread mold spores throughout your home, creating a larger problem.
- Underestimating the extent of the damage: Mold can grow hidden behind walls and ceilings. If you suspect extensive growth, it’s best to call a professional.
When should you call in the pros? If the mold covers a large area (more than 10 square feet), if you suspect it’s behind walls or in your HVAC system, or if you have health concerns (allergies, asthma), it’s time to call a certified mold removal expert.
Look for companies that are certified by organizations like the Institute of Inspection Cleaning and Restoration Certification (IICRC) or the American Council for Accredited Certification (ACAC). These certifications ensure that the company follows industry best practices and adheres to safety standards.
Specific challenges in Denver:
- Altitude: Denver’s high altitude means lower air pressure, which can affect the performance of dehumidifiers and other equipment.
- Temperature swings: The rapid temperature changes in Denver can lead to increased condensation, making mold growth more likely.
- Building codes: Denver has specific building codes related to mold remediation. Make sure any professional you hire is familiar with these codes.
Preventative measures are crucial.
- Ventilation: Ensure proper ventilation in bathrooms and kitchens by using exhaust fans.
- Dehumidifiers: Use a dehumidifier, especially during periods of high humidity or when running the AC. Aim for a humidity level between 30% and 50%.
- Air circulation: Keep air circulating throughout your home by using fans.
- Regular inspections: Regularly inspect your home for signs of water damage or mold growth.
- Proper insulation: Ensure your home is properly insulated to prevent condensation.
Consider investing in an air quality test, especially if you have persistent health issues or suspect hidden mold. These tests can identify the types and concentrations of mold spores in your home, providing valuable information for remediation.
Companies like RTK Environmental and SanAir Technologies Laboratory offer air quality testing services in the Denver area. They can provide a detailed analysis of your indoor air quality and recommend appropriate remediation strategies.
Don’t let mold take hold in your Denver home. By being proactive, vigilant, and informed, you can protect your health and your property. Remember, early detection and proper remediation are key to preventing a small problem from becoming a major headache.