Denver's Drywall: Altitude Mold Inflaming Lungs?
By Franklin Everett ShawThe musty smell. The faint, almost imperceptible discoloration on the drywall. It’s a homeowner’s nightmare, especially in a place like Denver, where the unique climate can turn a minor leak into a major mold problem faster than you can say “Rocky Mountain High.” But don’t panic. This isn’t a death sentence for your Denver dream home. It’s a challenge, and one you can tackle head-on with the right knowledge and a little elbow grease.
Denver’s altitude and fluctuating humidity create a perfect storm for what I call “altitude mold” – mold that thrives in the specific conditions of the Mile High City. The thin air means less ventilation, and the rapid temperature changes lead to condensation, especially in poorly insulated homes. This condensation soaks into drywall, creating a breeding ground for mold.
First, let’s talk about testing. Forget those expensive professional mold inspections right away. Start with a DIY test. You can buy a mold test kit at most hardware stores in Denver, like Ace Hardware on Colfax or Home Depot near I-25. These kits usually involve placing a petri dish with a growth medium in the affected area for a few days.
Here’s the catch: these kits only tell you if mold is present, not what kind or how much. But that’s enough to get started. If you see growth, it’s time to investigate further.
Now, for the opinionated part: I believe bleach is not the answer for mold on drywall. Bleach only kills surface mold and doesn’t penetrate porous materials like drywall. It also leaves behind moisture, which can actually feed the mold. Instead, use a borax-based cleaner or a specialized mold remover specifically designed for porous surfaces. You can find these at stores like Natural Grocers in Denver, which often carries eco-friendly options.
Here’s a step-by-step guide to safe mold removal on drywall:
- Gear Up: Wear gloves, a mask (N95 or better), and eye protection. This is crucial to protect yourself from mold spores.
- Ventilate: Open windows and doors to create airflow. Denver’s dry air will help speed up the drying process.
- Clean: Mix your chosen cleaner according to the instructions. Apply it to the affected area with a sponge or cloth. Don’t saturate the drywall.
- Scrub: Gently scrub the moldy area. Avoid aggressive scrubbing, which can damage the drywall.
- Dry: Thoroughly dry the area with a clean cloth or a dehumidifier. This is critical to prevent the mold from returning.
- Monitor: Keep an eye on the area for a few weeks to ensure the mold doesn’t reappear.
A common mistake is not addressing the source of the moisture. If you have a leaky pipe, a poorly sealed window, or inadequate ventilation, the mold will keep coming back. In Denver, this often means checking your roof for leaks after a heavy snow or hail storm, or ensuring your swamp cooler isn’t creating excessive humidity.
Let’s talk about landlords. In Colorado, landlords have a legal obligation to maintain a safe and habitable living environment. This includes addressing mold problems. If you’re a renter in Denver and you discover mold, document it thoroughly with photos and videos, and notify your landlord in writing. Keep a copy of your letter for your records. If your landlord fails to address the issue, you may have legal recourse. Consult with a tenant rights organization in Denver for more information.
Now, for a real-world scenario: Imagine you live in a historic Victorian home in Denver’s Capitol Hill neighborhood. These homes are beautiful, but often lack proper insulation and ventilation. You notice a musty smell and some discoloration on the drywall in your basement. You do a DIY mold test and it comes back positive.
Here’s what you should do:
- Identify the source of the moisture: Is it a leaky foundation? A poorly ventilated laundry room?
- Address the source: Repair the foundation, install a ventilation fan, or take other necessary steps to eliminate the moisture.
- Remove the mold: Follow the steps outlined above, using a borax-based cleaner specifically designed for drywall.
- Improve ventilation: Consider installing a dehumidifier in your basement to keep the humidity levels low.
- Monitor the area: Regularly inspect the drywall for any signs of mold regrowth.
Preventative measures are key, especially in Denver. Here are some tips to keep altitude mold at bay:
- Ventilate: Open windows regularly, especially after showering or cooking. Use exhaust fans in bathrooms and kitchens.
- Control humidity: Use a dehumidifier in damp areas like basements. Aim for a humidity level between 30% and 50%.
- Insulate: Properly insulate your home to prevent condensation.
- Repair leaks: Fix any leaks promptly, no matter how small.
- Clean regularly: Clean bathrooms and kitchens regularly to prevent mold growth.
One often overlooked area is the crawl space. Many Denver homes have crawl spaces that are poorly ventilated and prone to moisture. Make sure your crawl space is properly sealed and ventilated to prevent mold growth. Consider encapsulating your crawl space with a vapor barrier to further reduce moisture.
Finally, let’s talk about health impacts. Mold can cause a variety of health problems, including allergies, asthma, and respiratory infections. If you suspect you have mold in your home and you’re experiencing health problems, consult with a doctor. It’s especially important to be vigilant if you have young children, elderly family members, or individuals with compromised immune systems living in your home.
Don’t let altitude mold ruin your Denver living experience. By taking proactive steps to identify, remediate, and prevent mold growth, you can protect your home and your health. Remember, knowledge is power, and a little bit of effort can go a long way in keeping your Denver home mold-free.