Denver Homes: Is Altitude Air Fueling Radon Risk?

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
October 15, 2025

Imagine stepping into your Denver home, breathing in the crisp mountain air, unaware that an invisible threat might be lurking beneath your feet. That threat is radon, a naturally occurring radioactive gas that can seep into homes from the ground. But why Denver? And what can you, as a homeowner, do about it? The answer lies in a unique combination of geology, altitude, and construction practices, and thankfully, there are clear steps you can take to protect yourself and your family.

Denver’s elevated position, sitting a mile above sea level, plays a significant role in radon levels. The thinner air at this altitude means lower atmospheric pressure. This pressure difference can act like a vacuum, drawing soil gases, including radon, more readily into your home.

The geology of the Denver area also contributes to the problem. The Front Range is rich in granite, which contains uranium. As uranium decays, it produces radium, which in turn decays into radon. This radon gas then migrates through the soil and can enter homes through cracks in foundations, gaps around pipes, and other openings.

Furthermore, common home construction techniques in Denver can exacerbate the issue. Many homes are built with basements or slab-on-grade foundations, which are in direct contact with the soil. This provides a direct pathway for radon to enter the home. Older homes, in particular, may lack adequate sealing and ventilation, making them more susceptible to radon infiltration.

So, how do you know if your Denver home has a radon problem? The only way to be sure is to test. Fortunately, testing is relatively inexpensive and easy to do.

Here’s a step-by-step guide to testing for radon in your Denver home:

  1. Purchase a Radon Test Kit: You can find radon test kits at most hardware stores, home improvement centers, and online retailers. Look for kits that are approved by the Environmental Protection Agency (EPA). In Denver, consider purchasing a kit specifically designed for short-term testing, as these are often more accurate in detecting fluctuations in radon levels. A good option is the Air Chek Short-Term Radon Test Kit, readily available online.

  2. Choose a Testing Location: Select the lowest lived-in level of your home. This is typically the basement, but if you spend most of your time on the first floor, test there. Avoid testing in bathrooms, kitchens, or laundry rooms, as these areas are subject to high humidity and ventilation, which can affect the results.

  3. Prepare the Testing Area: Close all windows and exterior doors for 12 hours before starting the test and keep them closed during the testing period. This will help to ensure an accurate reading. Don’t operate fans or ventilation systems that draw air from outside.

  4. Set Up the Test Kit: Follow the instructions provided with your test kit. Typically, this involves placing the detector in the chosen location, away from drafts, direct sunlight, and high traffic areas.

  5. Leave the Test Kit in Place: The testing period usually lasts for 2-7 days, depending on the type of kit you use. Be sure to follow the instructions carefully.

  6. Send the Test Kit to the Lab: Once the testing period is complete, seal the test kit according to the instructions and mail it to the designated laboratory for analysis. The lab will send you the results within a few weeks.

  7. Interpret the Results: The EPA recommends taking action if your radon level is 4 picocuries per liter (pCi/L) or higher. Even levels between 2 pCi/L and 4 pCi/L should be considered for mitigation.

Now, let’s say your test results come back high. What are your options for radon mitigation in Denver?

Several mitigation techniques are effective in reducing radon levels in homes. The most common method is soil suction, which involves installing a vent pipe and fan to draw radon gas from beneath the foundation and vent it safely outside.

Here’s a breakdown of common radon mitigation methods in Denver:

  • Sub-slab Depressurization (SSD): This is the most common and effective method. A pipe is inserted through the foundation floor into the gravel or soil underneath. A fan connected to the pipe draws radon gas from below the slab and vents it above the roofline. This method is particularly effective in Denver’s older homes with basements.

  • Sub-membrane Depressurization: This method is used in crawl spaces. A plastic sheet is laid over the soil, and a vent pipe and fan are used to draw radon gas from beneath the membrane and vent it outside.

  • Sealing Cracks and Openings: Sealing cracks in the foundation and around pipes can help to reduce radon infiltration. However, sealing alone is usually not enough to lower radon levels below the EPA action level.

  • House Pressurization: This method involves using a fan to create positive pressure inside the house, which can prevent radon from entering. However, this method is less common and can be less effective than soil suction.

  • Heat Recovery Ventilation (HRV) or Energy Recovery Ventilation (ERV): These systems bring fresh air into the home while exhausting stale air. While not specifically designed for radon mitigation, they can help to reduce radon levels by increasing ventilation.

Choosing the right mitigation method depends on the specific characteristics of your home and the level of radon present. It’s crucial to consult with a certified radon mitigation professional to determine the best course of action.

Finding a qualified radon professional in the Denver metro area is essential for effective mitigation. Look for professionals who are certified by the National Radon Proficiency Program (NRPP) or the American Association of Radon Scientists and Technologists (AARST).

Here’s how to find certified radon professionals in Denver:

  • Check the NRPP or AARST Websites: Both organizations have online directories of certified radon professionals. You can search by location to find professionals in the Denver area.

  • Ask for Referrals: Ask friends, family, or neighbors if they have used a radon professional in the past and would recommend them.

  • Check Online Reviews: Look for online reviews of radon professionals on websites like Yelp, Google, and Angie’s List.

  • Verify Credentials: Before hiring a radon professional, verify their certification and insurance.

Common mistakes developers face when dealing with radon include:

  • Ignoring Radon Testing: Failing to test for radon is a major oversight. Radon levels can vary significantly from house to house, even in the same neighborhood.

  • Improper Sealing: Inadequate sealing of cracks and openings can allow radon to enter the home.

  • Poor Ventilation: Insufficient ventilation can trap radon gas inside the home.

  • Using Uncertified Professionals: Hiring uncertified radon professionals can result in ineffective mitigation and potential health risks.

  • Failing to Follow Up: After mitigation, it’s important to retest to ensure that radon levels have been reduced to an acceptable level.

Overcoming these challenges requires a proactive approach. Always test for radon, use certified professionals, and ensure proper sealing and ventilation.

In conclusion, radon is a real concern for Denver homeowners due to the city’s altitude, geology, and common construction practices. However, by understanding the risks, testing your home, and taking appropriate mitigation measures, you can protect yourself and your family from the dangers of radon exposure. Don’t let this invisible threat compromise your health and well-being. Take action today to ensure a safe and healthy home environment in the Mile High City.

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.