**Denver Homes: Is Radon Crashing Altitude Livers?**
By Franklin Everett ShawThe air in your Denver home might be hiding a silent threat, one you can’t see, smell, or taste: radon. This radioactive gas, a byproduct of uranium decay in the earth, seeps into homes and buildings, especially in areas with granite-rich soil like Colorado. But don’t panic! Knowledge is power, and understanding radon is the first step to protecting yourself and your family.
Radon is a serious issue in Denver, and ignoring it is a gamble you can’t afford to take.
Here’s your comprehensive guide to radon testing and mitigation in the Mile High City.
Colorado’s unique geology and high altitude create a perfect storm for radon accumulation. The Front Range, where Denver sits, is riddled with granite formations, a primary source of uranium. Higher elevations also mean lower atmospheric pressure, which can draw radon gas more readily into buildings.
But here’s the kicker: studies suggest that at higher altitudes, radon’s impact on liver health is amplified. This is because the body’s detoxification processes, already stressed by the thinner air, are further burdened by the radioactive particles inhaled with radon.
Don’t just assume your neighbor’s house is safe and yours is too. Radon levels vary dramatically from house to house, even on the same street.
Step 1: Testing for Radon
You have two primary options for testing: DIY kits or hiring a certified professional.
DIY Radon Test Kits: These are readily available at hardware stores like Home Depot or Lowe’s in the Denver area, and online retailers. They typically involve placing a passive detector in your home for a specified period (usually 2-7 days) and then sending it to a lab for analysis.
- Pros: Cost-effective (usually under $50), convenient.
- Cons: Can be prone to tampering or improper placement, potentially leading to inaccurate results. Requires you to handle the sample and mail it.
Certified Radon Professionals: These individuals are trained and certified to conduct radon testing using specialized equipment and protocols. They can provide more accurate and reliable results, especially in complex situations.
- Pros: Accurate results, professional expertise, can identify potential entry points.
- Cons: More expensive (typically $150-$300), requires scheduling an appointment.
Choosing the Right Test:
For a quick initial assessment, a DIY kit is fine. However, if you have any concerns about accuracy or if your initial test comes back elevated (above 4 pCi/L, the EPA’s action level), hire a certified professional.
Common Mistakes with DIY Kits:
- Placing the detector near drafts, windows, or exterior walls.
- Testing during unusual weather conditions (e.g., opening windows during a test designed for closed-house conditions).
- Failing to follow the instructions precisely.
Overcoming these mistakes: Read the instructions thoroughly before starting. Choose a location in the lowest lived-in level of your home, away from drafts and disturbances. Maintain closed-house conditions (windows and doors closed) during the test period.
Step 2: Interpreting Your Results
The EPA recommends taking action if your radon level is 4 pCi/L (picocuries per liter) or higher. Even levels between 2 and 4 pCi/L warrant consideration of mitigation. Remember, there is no safe level of radon.
Understanding the pCi/L Scale:
- Below 2 pCi/L: Generally considered low risk, but consider retesting periodically.
- 2-4 pCi/L: Mitigation is recommended.
- Above 4 pCi/L: Mitigation is strongly recommended.
The Denver Altitude Factor: Don’t ignore lower readings just because they’re below 4 pCi/L. Given the increased risk to liver health at Denver’s altitude, even levels between 2 and 4 pCi/L should be taken seriously.
Step 3: Radon Mitigation
If your radon levels are elevated, mitigation is the solution. The most common and effective mitigation method is soil suction, also known as sub-slab depressurization.
How Sub-Slab Depressurization Works:
A pipe is inserted through the foundation slab into the soil beneath. A fan connected to the pipe draws radon gas from the soil and vents it safely above the roofline. This creates a negative pressure zone under the slab, preventing radon from entering your home.
Mitigation System Costs in Denver:
Expect to pay between $1,200 and $3,000 for a professionally installed radon mitigation system in Denver. The cost depends on factors like the size of your home, the type of foundation, and the complexity of the installation.
DIY Mitigation: A Risky Proposition:
While DIY mitigation might seem tempting to save money, it’s generally not recommended. Improper installation can render the system ineffective or even create new problems.
Finding a Qualified Mitigation Contractor:
- Look for contractors certified by the National Radon Proficiency Program (NRPP) or the American Association of Radon Scientists and Technologists (AARST).
- Get multiple bids and compare quotes.
- Ask for references and check online reviews.
- Ensure the contractor provides a warranty on their work.
Common Mitigation Mistakes:
- Improper fan placement (too close to windows or doors).
- Inadequate sealing of cracks and openings in the foundation.
- Using undersized or overpowered fans.
- Failing to properly vent the radon gas above the roofline.
Step 4: Financial Assistance Programs in Denver
Radon mitigation can be a significant expense, but financial assistance programs are available to help Denver homeowners.
- Colorado Department of Public Health and Environment (CDPHE): While CDPHE doesn’t offer direct financial assistance, they provide valuable resources and information about radon testing and mitigation.
- Local City and County Programs: Check with the Denver Department of Public Health & Environment and the Denver Housing Authority for potential grant or loan programs. These programs often have income eligibility requirements.
- Federal Programs: Explore potential tax credits or deductions for energy-efficient home improvements, which may include radon mitigation. Consult with a tax professional for details.
Specific Denver Resources:
- Denver Department of Public Health & Environment: (720) 913-1311
- Colorado Department of Public Health and Environment: (303) 692-2000
- NRPP and AARST websites: For finding certified radon professionals in your area.
Step 5: Long-Term Monitoring
Even after mitigation, it’s crucial to monitor radon levels periodically to ensure the system is working effectively. A simple, inexpensive DIY test every year or two is sufficient.
What to Do if Levels Rise Again:
If your radon levels increase after mitigation, contact your mitigation contractor to inspect the system and make any necessary repairs or adjustments.
Radon is a serious health hazard, especially in Denver’s unique environment. But by taking proactive steps to test your home and mitigate if necessary, you can protect yourself and your family from this silent threat. Don’t delay – take action today to ensure a healthier future in your Denver home.