Houston Humidity: Is Tap Copper Ruining Lasers?
By Franklin Everett ShawAre you zapping away unwanted hair in Houston? You might be unknowingly sabotaging your laser hair removal device. The culprit? Houston’s unique combination of aging infrastructure and high humidity, potentially leading to elevated copper levels in your tap water. This isn’t just about aesthetics; it’s about the longevity and performance of your expensive cosmetic lasers.
Houston, we have a problem, and it’s copper. The city’s aging water infrastructure, particularly in older neighborhoods like the Heights and Montrose, relies heavily on copper pipes. Over time, these pipes corrode, especially when exposed to Houston’s humid air and the slightly acidic nature of some water sources. This corrosion releases copper into the water supply.
While Houston Public Works assures that the water meets EPA standards, those standards are designed for human consumption, not the delicate internal workings of laser hair removal devices. The EPA’s action level for copper is 1.3 parts per million (ppm). However, even levels below this can cause problems for sensitive electronics.
Copper is a fantastic conductor of electricity, which is why it’s used in wiring. But in the wrong place, it can cause short circuits and corrosion. Laser hair removal devices, and other cosmetic lasers, rely on precise electrical currents to generate the laser beam. Copper particulate in the water used to clean or cool these devices can deposit on internal components, disrupting these currents and leading to malfunctions.
Consider this scenario: You’re diligently using your at-home laser hair removal device, rinsing the applicator head under the tap after each session. Over time, microscopic copper particles accumulate on the laser diode or the cooling system. This buildup can cause the laser to become less efficient, requiring more passes to achieve the same results. Eventually, the device may fail altogether.
The humidity in Houston exacerbates this problem. Copper corrosion is accelerated in humid environments. The moisture in the air also allows copper particles to migrate more easily within the device, increasing the risk of short circuits.
So, what can a Houstonian do to protect their investment in cosmetic lasers? The solution is multi-pronged.
First, know your water. Contact Houston Public Works and request a water quality report for your specific neighborhood. This report will give you an idea of the average copper levels in your area. You can also purchase a home water testing kit to get a more precise reading from your tap.
Second, ditch the tap water for cleaning. This is the most crucial step. Use distilled water to clean your laser hair removal device or any other cosmetic laser. Distilled water is free of minerals and impurities, including copper. This prevents the introduction of new copper particles into the device.
Third, consider a water filter. A whole-house water filter or a point-of-use filter (like a faucet filter or a pitcher filter) can significantly reduce copper levels in your tap water. Look for filters certified to NSF/ANSI Standard 53 for copper reduction. This standard ensures that the filter effectively removes copper from the water.
Fourth, regularly inspect and maintain your device. Check the applicator head and any cooling systems for signs of corrosion or buildup. Follow the manufacturer’s instructions for cleaning and maintenance. If you notice any unusual behavior, such as reduced power or erratic operation, consult a qualified technician.
Fifth, think about your pipes. If you live in an older home with copper pipes, consider replacing them with PEX (cross-linked polyethylene) pipes. PEX pipes are more resistant to corrosion and won’t leach copper into the water. This is a significant investment, but it can improve your water quality and protect all your appliances, not just your laser hair removal device.
Let’s look at a case study. Sarah, a resident of the Heights, noticed that her at-home laser hair removal device was becoming less effective after only a year of use. She contacted the manufacturer, who suggested that hard water or mineral buildup could be the problem. Sarah switched to using distilled water for cleaning and noticed a significant improvement in the device’s performance. She also installed a faucet filter to reduce copper levels in her drinking water.
Another common pitfall is neglecting to dry the device thoroughly after cleaning. Even with distilled water, residual moisture can promote corrosion. Always use a clean, dry cloth to wipe down the device after cleaning.
Many developers of at-home laser devices don’t account for regional water quality variations. They assume that tap water is universally safe for cleaning. This is a mistake, especially in cities like Houston with known water quality challenges. Manufacturers should include specific instructions for users in areas with high mineral content or known copper contamination.
The long-term impact of copper contamination on cosmetic lasers is significant. It can shorten the lifespan of the device, reduce its effectiveness, and potentially void the warranty. By taking proactive steps to protect your device, you can ensure that it continues to deliver the desired results for years to come.
Don’t let Houston’s water compromise your beauty routine. By understanding the risks and implementing these practical tips, you can keep your laser hair removal device, and other cosmetic lasers, running smoothly and effectively. It’s a small investment that can save you money and frustration in the long run.