**Phoenix Pools: Chlorine Lies Burning Lip Lasers?**
By Franklin Everett ShawIs that persistent lip “burn” after a dip in the pool just a figment of your imagination? Probably not. Many Phoenix, Arizona residents experience this annoying sensation, and while it’s easy to blame chlorine, the reality is more nuanced. Let’s dive into what’s really happening and how to protect your pout.
Chlorine gets a bad rap, but it’s essential for keeping our pools safe from harmful bacteria. However, it’s not the only culprit when it comes to lip irritation.
Several factors contribute to that burning sensation, and understanding them is the first step to finding relief.
First, let’s address the chlorine question directly. Chlorine, when properly balanced, shouldn’t cause significant irritation. The problem arises when chlorine levels are too high or, more commonly, when the pH balance is off. An imbalanced pH can make the chlorine less effective, leading to the addition of more chlorine, creating a vicious cycle.
Think of it like this: you’re trying to clean your kitchen counter, but the cleaning spray isn’t working. Do you just keep spraying more and more? No, you check to see if the spray is expired or if you’re using the right cleaner for the job. The same principle applies to pool chemistry.
Beyond chlorine, other pool chemicals can contribute to lip sensitivity. Chloramines, byproducts of chlorine reacting with organic matter (sweat, sunscreen, etc.), are a major irritant. These are what give pools that “chlorine” smell, and they’re far more irritating than chlorine itself.
The intense Phoenix sun also plays a significant role. UV radiation can damage the delicate skin on your lips, making them more susceptible to irritation from pool chemicals. It’s a double whammy: the sun weakens the skin, and the chemicals then exacerbate the problem.
Dehydration is another often-overlooked factor. Swimming, especially in the dry Phoenix climate, can dehydrate you, leaving your lips dry and cracked, making them more vulnerable to irritants.
So, what can you do to protect your lips? Here’s a practical guide for Phoenix swimmers:
Protective Lip Balm is Your Best Friend: Before you even think about entering the pool, apply a thick layer of water-resistant lip balm with a high SPF (30 or higher). Look for balms containing ingredients like beeswax, shea butter, or coconut oil. Reapply frequently, especially after swimming or toweling off. Don’t just grab any lip balm; specifically seek out water-resistant formulas.
Pre- and Post-Swim Routine: Before swimming, gently exfoliate your lips with a soft toothbrush or a sugar scrub to remove any dead skin cells. This creates a smoother surface for the lip balm to adhere to. After swimming, rinse your lips thoroughly with fresh water to remove any residual chemicals. Reapply lip balm immediately.
Hydrate, Hydrate, Hydrate: Drink plenty of water before, during, and after swimming. Dehydration makes your skin more susceptible to irritation. Carry a water bottle with you and sip on it regularly.
Avoid Licking Your Lips: This seems obvious, but it’s a common habit that can worsen irritation. Saliva contains enzymes that can break down the skin’s natural barrier, making your lips more vulnerable to pool chemicals.
Consider a Barrier Cream: For extra protection, especially if you have sensitive skin, apply a thin layer of a barrier cream like Vaseline or Aquaphor over your lip balm. This creates an additional layer of protection against pool chemicals.
Know Your Pool: If you consistently experience lip irritation at a particular pool, it might be due to poor chemical management. Consider swimming at other pools or, if it’s your own pool, invest in regular professional maintenance.
Alternative Sanitization Methods: If you own a pool in Phoenix, explore alternative sanitization methods like saltwater systems or UV sanitizers. Saltwater systems still use chlorine, but they generate it from salt, often resulting in lower and more stable chlorine levels. UV sanitizers use ultraviolet light to kill bacteria, reducing the need for chlorine.
- Saltwater Systems: These systems convert salt into chlorine through electrolysis. While they still produce chlorine, the levels are typically lower and more consistent than with traditional chlorine systems. This can reduce irritation.
- UV Sanitizers: These systems use ultraviolet light to kill bacteria and algae. They can significantly reduce the amount of chlorine needed, but they don’t eliminate it entirely.
- Ozone Generators: Ozone is a powerful oxidizer that can kill bacteria and algae. Ozone generators can be used in conjunction with chlorine to reduce the amount of chlorine needed.
Report Concerns: If you suspect a public pool in Phoenix is not properly maintained, report your concerns to the Maricopa County Environmental Services Department. They are responsible for inspecting and regulating public pools to ensure they meet health and safety standards. You can find their contact information on the Maricopa County website. Don’t hesitate to report issues; your health and the health of others may depend on it.
Common mistakes developers make when dealing with pool chemistry (and how to avoid them):
- Relying solely on test strips: Test strips are convenient, but they’re not always accurate. Invest in a good quality liquid test kit for more precise readings.
- Ignoring alkalinity: Alkalinity acts as a buffer for pH, preventing it from fluctuating wildly. Always adjust alkalinity before adjusting pH.
- Adding chemicals directly to the pool: Always pre-dissolve chemicals in a bucket of water before adding them to the pool to prevent localized high concentrations that can damage surfaces and irritate swimmers.
- Not shocking the pool regularly: Shocking the pool with a high dose of chlorine helps to break down chloramines and other organic contaminants. Do this at least once a week, or more frequently if the pool is heavily used.
- Forgetting about calcium hardness: Low calcium hardness can cause the pool water to become corrosive, damaging pool surfaces. Maintain calcium hardness within the recommended range.
Let’s consider a real-world scenario: The Paradise Valley Community Pool in Phoenix has been receiving complaints about swimmers experiencing skin and lip irritation. The pool manager, instead of simply adding more chlorine, decides to investigate further. They test the water using a liquid test kit and discover that the pH is too high and the alkalinity is too low. They adjust the alkalinity first, then the pH, bringing them both into the recommended ranges. They also shock the pool to break down chloramines. In addition, they post signs reminding swimmers to shower before entering the pool and to apply sunscreen and lip balm. Within a week, the complaints subside.
Another example: A homeowner in Scottsdale, Arizona, is tired of dealing with the hassle of chlorine and the associated irritation. They decide to install a saltwater system. After the initial setup, they find that the water is much gentler on their skin and lips. They still need to monitor the chlorine levels and pH, but the fluctuations are much less dramatic than with their old chlorine system.
By understanding the factors that contribute to lip irritation and taking proactive steps to protect your skin, you can enjoy swimming in Phoenix pools without the burning sensation. Remember, it’s not just about chlorine; it’s about balance, hydration, and protection. So, grab your water-resistant lip balm, stay hydrated, and dive in!