Phoenix Pools: Is Desert Sun Crashing Summer Cycles?
By Franklin Everett ShawThe shimmering heat rising off the asphalt. The relentless sun beating down. It’s just another day in Phoenix, Arizona. But for those of us lucky enough to have a pool, it’s also an invitation to cool off. However, that refreshing dip can come with hidden risks, especially when it comes to the invisible chemistry of our pool water. We’re talking about cyanuric acid (CYA), and in the Phoenix climate, it’s a silent saboteur of swimmer safety.
This isn’t your typical pool maintenance guide. We’re diving deep into the specific challenges Phoenix residents face with CYA, offering actionable solutions to keep your pool water healthy and your skin happy.
Cyanuric acid, also known as stabilizer or conditioner, is used to protect chlorine from being broken down by the sun’s ultraviolet (UV) rays. Without it, chlorine in your pool would dissipate rapidly, especially under the intense Arizona sun. This means you’d be constantly adding chlorine, which is both expensive and inconvenient.
However, too much CYA can be a problem. High levels of CYA reduce the effectiveness of chlorine, making it harder to kill bacteria and algae. This can lead to unsanitary swimming conditions and increase the risk of skin irritation, rashes, and other health issues.
Why is this a bigger problem in Phoenix? The intense sunlight necessitates higher CYA levels to begin with. Evaporation rates are also higher, concentrating the CYA that’s already in the water. Many pool owners, unaware of the risks, continue to add stabilized chlorine (dichlor or trichlor) without regularly testing and adjusting their CYA levels.
So, how do you know if your CYA is too high? The first step is testing.
- Test Kits: You can purchase a CYA test kit at most pool supply stores in Phoenix. These kits typically involve mixing pool water with a reagent and comparing the resulting turbidity (cloudiness) to a chart. While affordable, they can be subjective and less accurate.
- Test Strips: These are convenient but generally less accurate than liquid test kits. Look for strips that specifically test for CYA.
- Professional Testing: The most accurate method is to take a water sample to a local pool supply store for professional testing. Many stores in the Phoenix area offer free water testing services. Leslie’s Pool Supplies and Pinch a Penny are two common options.
What CYA level should you aim for? The ideal range is typically between 30-50 ppm (parts per million). Above 100 ppm, chlorine’s effectiveness is significantly reduced. Some experts recommend keeping it even lower, around 20-30 ppm, especially in residential pools with heavy use.
Now, let’s say your test results come back and your CYA is sky-high. What do you do?
The most effective way to lower CYA is through a partial drain and refill. This involves draining a portion of your pool water and replacing it with fresh water.
Here’s a step-by-step guide:
Determine the volume of your pool. You’ll need this to calculate how much water to drain.
Calculate the amount of water to drain. Use the following formula:
Water to Drain = Pool Volume x (Current CYA - Target CYA) / Current CYA
For example, if your pool holds 10,000 gallons, your current CYA is 150 ppm, and your target CYA is 50 ppm:
Water to Drain = 10,000 x (150 - 50) / 150 = 6,667 gallons
You would need to drain approximately 6,667 gallons of water.
Drain the water. Use a submersible pump to drain the calculated amount of water. Be careful not to drain too much, as this could damage your pool’s liner or structure.
Refill the pool. Refill the pool with fresh water from your garden hose.
Retest the water. After refilling, retest your CYA level to ensure it’s within the desired range. You may need to repeat the process if the level is still too high.
Important Considerations:
- Water Conservation: Phoenix is a desert city, so water conservation is crucial. Consider using a pool cover to reduce evaporation and minimize the need for frequent draining and refilling.
- Saltwater Pools: Saltwater pools also use CYA to protect the chlorine generated by the salt system. The same principles apply to maintaining proper CYA levels in saltwater pools.
- Well Water: If you use well water to fill your pool, test it for minerals and other contaminants that could affect water chemistry.
- Local Regulations: Be aware of any local regulations regarding pool water drainage. Some municipalities may have restrictions on where you can discharge pool water.
Alternative Sanitization Methods:
If you’re struggling to maintain proper CYA levels with traditional chlorine, consider exploring alternative sanitization methods. These options can reduce or eliminate the need for CYA.
- Ozone Systems: Ozone is a powerful oxidizer that can kill bacteria and algae without producing harmful byproducts. Ozone systems can significantly reduce the amount of chlorine needed, thereby lowering CYA buildup.
- UV Systems: UV systems use ultraviolet light to kill microorganisms in the water. Like ozone, UV systems can reduce chlorine demand and minimize CYA accumulation.
- Mineral Systems: Mineral systems use minerals like silver and copper to inhibit algae growth and reduce the need for chlorine.
- Non-Chlorine Shocks: Using non-chlorine shock treatments (potassium monopersulfate) can help oxidize organic contaminants without adding CYA.
Common Mistakes and Pitfalls:
- Over-Stabilizing: Adding too much stabilizer (CYA) at the beginning of the season, thinking it will last longer. This is a common mistake that leads to high CYA levels.
- Ignoring Test Results: Not regularly testing your pool water and relying solely on visual cues. This can lead to imbalances and health risks.
- Using Stabilized Chlorine Exclusively: Continuously using dichlor or trichlor chlorine without monitoring CYA levels. Switch to liquid chlorine (sodium hypochlorite) or cal hypo (calcium hypochlorite) periodically to avoid CYA buildup.
- Not Calculating Drain and Refill Accurately: Guessing the amount of water to drain and refill, leading to inaccurate CYA adjustments.
- Draining During Peak Heat: Draining your pool during the hottest part of the day can damage the pool surface. Do it in the early morning or late evening.
Real-World Scenario:
Let’s say you live in Scottsdale, Arizona, and you have a 15,000-gallon pool. You’ve been using trichlor tablets all summer, and your latest CYA test shows a level of 180 ppm. You want to get it down to 50 ppm.
Using the formula:
Water to Drain = 15,000 x (180 - 50) / 180 = 10,833 gallons
You would need to drain approximately 10,833 gallons of water. This is a significant amount, so you might consider doing it in two stages to minimize water waste. Drain half, refill, test, and then repeat if necessary.
Actionable Insights:
- Invest in a reliable test kit or use professional testing services regularly. Don’t rely on guesswork.
- Calculate the exact amount of water to drain and refill. Use the formula provided.
- Consider alternative sanitization methods to reduce CYA dependence.
- Use a pool cover to minimize evaporation and water loss.
- Educate yourself on pool water chemistry. Understanding the basics will empower you to make informed decisions.
Maintaining a healthy pool in Phoenix requires vigilance and a proactive approach. By understanding the challenges posed by high CYA levels and implementing the strategies outlined above, you can ensure a safe and enjoyable swimming experience for yourself and your family. Don’t let the desert sun turn your pool into a health hazard. Take control of your water chemistry and enjoy the refreshing oasis you deserve.