**Phoenix Pools: Is Your "Salt System" Burning Lasers?**
By Franklin Everett ShawImagine stepping into your backyard oasis, ready for a refreshing swim, only to be assaulted by the overpowering smell of chlorine. It’s not just unpleasant; it’s a sign something is seriously wrong with your salt water pool system. For Arizona homeowners, especially in the scorching heat of Scottsdale and Gilbert, this “laser-like” chlorine level can quickly turn your dream pool into a chemical hazard.
This isn’t about simply adding more chemicals. It’s about understanding the delicate balance of your salt water system and knowing how to troubleshoot issues before they escalate. We’re diving deep into the common culprits behind excessive chlorine production, offering actionable steps to reclaim your pool and protect your investment.
First, let’s talk about what “laser-like” chlorine actually means. It’s that stinging sensation in your eyes, the bleached-out swimwear, and the overall feeling that you’re swimming in a diluted cleaning solution. Ideally, your pool’s chlorine level should be between 1-3 ppm (parts per million). Anything significantly higher indicates a problem.
The most common cause of excessive chlorine in a salt water pool is an overactive salt cell. This is the heart of your system, converting salt into chlorine. Several factors can lead to its malfunction:
Incorrect Settings: This is the low-hanging fruit. Many homeowners, especially after initial setup or maintenance, fail to properly adjust the chlorine generator’s output. It’s like setting your thermostat to 90 degrees in the middle of summer – it’s going to overwork. Solution: Consult your salt system’s manual and reduce the output percentage or run time. Start with small adjustments and retest the water after 24 hours.
Scaling on the Salt Cell: Arizona’s hard water is notorious for causing calcium buildup, or scaling, on the salt cell plates. This reduces the cell’s efficiency, causing it to work harder and potentially produce excessive chlorine. Solution: Inspect your salt cell regularly. If you see white, flaky deposits, clean it according to the manufacturer’s instructions. Typically, this involves soaking the cell in a diluted muriatic acid solution. Always wear protective gear (gloves, eye protection) when handling acid.
High Salt Levels: While salt is essential, too much can overwhelm the system and lead to over-chlorination. Solution: Test your pool’s salt level using a salt test kit or take a water sample to a local pool supply store. The ideal salt level varies depending on the system, but it’s usually between 2700-3400 ppm. If the salt level is too high, partially drain the pool and refill it with fresh water.
Phosphate Levels: High phosphate levels can interfere with chlorine’s effectiveness, causing the system to compensate by producing more. Solution: Test your pool water for phosphates. If levels are elevated, use a phosphate remover specifically designed for pools.
Calcium Hardness: Similar to scaling, high calcium hardness can contribute to overall water imbalance and affect chlorine production. Solution: Test your calcium hardness levels. If they are too high, consider using a sequestering agent to prevent calcium from precipitating out of the water.
Now, let’s get practical. Here’s a step-by-step guide to troubleshooting excessive chlorine:
Test Your Water: Use a reliable test kit (liquid or strips) to measure chlorine, pH, alkalinity, calcium hardness, and salt levels. Record your results.
Inspect the Salt Cell: Turn off the system and visually inspect the salt cell for scaling. If present, clean it according to the manufacturer’s instructions.
Adjust System Settings: Based on your water test results, adjust the chlorine generator’s output percentage or run time. Start with small adjustments (e.g., reducing the output by 10%) and retest after 24 hours.
Check Salt Levels: If the salt level is too high, partially drain and refill the pool.
Address Phosphate Levels: If phosphate levels are elevated, use a phosphate remover.
Monitor and Retest: Continue to monitor your water chemistry and adjust settings as needed. It may take several days to achieve the desired chlorine level.
A common pitfall is neglecting regular maintenance. Many Arizona homeowners treat their pools as “set it and forget it” systems. This leads to scaling, imbalances, and ultimately, problems like excessive chlorine. Implement a regular maintenance schedule that includes:
- Weekly water testing
- Monthly salt cell inspection
- Cleaning the salt cell as needed
- Balancing water chemistry (pH, alkalinity, calcium hardness)
Another challenge is understanding local regulations. In Arizona, pool sanitation is regulated by the Arizona Department of Health Services. While specific chlorine level requirements may vary by county or municipality, maintaining a safe and sanitary swimming environment is paramount. Familiarize yourself with local regulations to ensure compliance.
For example, Scottsdale may have different enforcement priorities compared to a more rural area like Payson. Knowing these nuances can save you from potential fines or closures.
Finally, don’t underestimate the importance of professional help. If you’ve tried troubleshooting and adjusting settings without success, consult a qualified pool technician. They can diagnose more complex issues, such as a faulty salt cell or a problem with the control system.
Excessive chlorine in your salt water pool is a problem that demands attention. By understanding the underlying causes, implementing a regular maintenance schedule, and seeking professional help when needed, you can reclaim your pool and enjoy a safe and refreshing swimming experience, even in the Arizona heat. Don’t let “laser-like” chlorine ruin your backyard oasis. Take control and keep your pool water balanced and enjoyable.