**Reno Roofs: Cheap Shingles Spawning Deadly Lung Mold?**
By Franklin Everett ShawThe musty smell hit me the moment I opened the door. It wasn’t the usual Reno dust; this was different, a damp, earthy odor that clung to the back of my throat. I knew, with a sinking feeling, that I had a mold problem. And living in a 1970s ranch house with those awful, cheap asphalt shingles, I knew exactly where to start looking.
Reno’s dry climate might seem like mold’s worst enemy, but the truth is, our temperature swings and occasional heavy snowfalls create the perfect conditions for it to thrive, especially under porous roofing materials. Those bargain-basement shingles, popular in older Reno neighborhoods like Wells Avenue and the area around UNR, are notorious for absorbing moisture and providing a breeding ground for mold.
So, how do you know if you’re facing a similar situation? Let’s dive into identifying, testing, and tackling mold growth stemming from those problematic shingles.
First, identification is key. Look for these telltale signs:
- Discoloration on your roof: Dark streaks, green patches, or any unusual staining on your shingles. This is often the first visible indicator.
- Musty odors: As I experienced, a persistent musty smell inside your home, especially in the attic or near exterior walls, can signal mold growth.
- Water stains on ceilings or walls: These indicate a leak, which is a prime condition for mold. Check around windows and skylights too.
- Visible mold growth: Obvious patches of mold, which can be black, green, white, or brown, on interior surfaces.
Now, let’s talk about DIY testing. While professional testing provides the most accurate results, there are a few things you can do yourself to get an initial assessment.
- Visual inspection: Carefully inspect your attic, paying close attention to the underside of the roof. Use a flashlight and look for any signs of mold.
- Surface sampling: You can purchase DIY mold test kits at most hardware stores in Reno, like Lowe’s or Home Depot on South Virginia Street. These kits typically involve swabbing a suspected area and sending the sample to a lab for analysis. Be aware that these tests can sometimes be unreliable, providing false positives or negatives.
- Tape test: A simple method involves pressing clear tape onto a suspected moldy surface and then sticking it to a clean, dark piece of paper. Examine the tape closely for any visible mold spores.
Important Note: When inspecting for mold, always wear protective gear, including a mask, gloves, and eye protection. Mold spores can be harmful, especially to those with respiratory issues.
If your DIY tests suggest mold growth, it’s time to consider remediation. For small areas (less than 10 square feet), you might be able to handle the cleanup yourself. Here’s a step-by-step guide:
- Contain the area: Seal off the affected area with plastic sheeting to prevent spores from spreading.
- Ventilate: Open windows and use fans to improve ventilation.
- Clean the surface: Use a solution of bleach and water (1 part bleach to 10 parts water) to scrub the moldy surface. Always test the solution in an inconspicuous area first to ensure it doesn’t damage the material.
- Dry thoroughly: After cleaning, dry the area completely with fans or a dehumidifier. Mold thrives in damp environments.
- Dispose of contaminated materials: Place any contaminated materials, such as rags or sponges, in sealed plastic bags and dispose of them properly.
However, when should you call a professional? This is crucial, especially in Reno’s unique climate.
- Large areas of mold growth: If the mold covers more than 10 square feet, it’s best to leave it to the professionals.
- HVAC contamination: If you suspect mold in your HVAC system, professional cleaning is essential to prevent spores from circulating throughout your home.
- Health concerns: If you or anyone in your family experiences respiratory problems, allergies, or other health issues that you suspect are related to mold exposure, consult a doctor and hire a professional mold remediation company.
- Uncertainty: If you’re unsure about the extent of the mold growth or how to properly remediate it, it’s always best to err on the side of caution and call a professional.
Reno has several reputable mold testing and remediation companies. Look for companies that are certified by organizations like the Institute of Inspection, Cleaning and Restoration Certification (IICRC). Some local options include (but are not endorsements):
- Mold Solutions of Nevada: They offer comprehensive mold testing and remediation services.
- Envirocare: Specializes in environmental testing and remediation, including mold.
- SERVPRO of Reno: A national franchise with local offices offering mold remediation services.
Challenges and Pitfalls:
- Ignoring the source of the moisture: Simply cleaning up the mold without addressing the underlying moisture problem is a common mistake. The mold will simply return. In Reno, this often means addressing roof leaks caused by damaged or worn-out shingles.
- Using the wrong cleaning products: Some cleaning products can actually make mold growth worse. Avoid using ammonia or vinegar, as they can feed certain types of mold.
- Cross-contamination: Spreading mold spores to other areas of your home during the cleanup process is a significant risk. Proper containment and ventilation are essential.
- Underestimating the health risks: Mold exposure can cause a variety of health problems, including allergies, asthma, and other respiratory issues. Don’t take mold growth lightly.
Choosing Safer Roofing Materials:
If you’re replacing your roof, consider investing in mold-resistant materials that are better suited to Reno’s climate.
- Metal roofing: Metal roofs are highly durable, fire-resistant, and mold-resistant. They also reflect sunlight, which can help keep your home cooler in the summer.
- Tile roofing: Tile roofs are another excellent option for Reno. They are durable, fire-resistant, and naturally mold-resistant.
- Synthetic roofing: Synthetic roofing materials, such as composite shingles, are designed to mimic the look of natural materials like slate or wood shake, but they are more durable and mold-resistant.
Real-World Application:
Consider the case of a homeowner in the Old Southwest neighborhood of Reno. They noticed a musty smell and water stains on their ceiling. After a DIY test, they discovered mold growth in their attic, stemming from a leaky roof with old asphalt shingles. They hired a professional mold remediation company to remove the mold and then replaced their roof with a metal roof. This not only eliminated the mold problem but also improved the energy efficiency of their home.
Actionable Insights:
- Regular roof inspections: Inspect your roof at least twice a year, especially after heavy snowfalls or periods of rain. Look for signs of damage, such as cracked or missing shingles.
- Proper ventilation: Ensure your attic is properly ventilated to prevent moisture buildup.
- Address leaks promptly: Repair any leaks as soon as possible to prevent mold growth.
- Consider a dehumidifier: Use a dehumidifier in damp areas of your home, such as the basement or crawl space.
Living in Reno doesn’t make us immune to mold. By understanding the risks associated with cheap asphalt shingles, knowing how to identify and test for mold, and taking appropriate remediation steps, Reno homeowners can protect their homes and their health. Don’t let a musty smell turn into a major problem. Take action today!