**Taos Adobe: Is "Green" Building Fueling Lung Mold?**

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
October 6, 2025

The scent of damp earth and sun-baked clay is iconic in Taos, New Mexico. But that same earthy aroma can sometimes mask a hidden danger lurking within the walls of traditional adobe homes: mold. The push for energy efficiency, while laudable, might be inadvertently exacerbating the problem.

Adobe, a mixture of earth, water, and straw, has been a building material of choice in the Southwest for centuries. Its thermal mass provides natural heating and cooling, a boon in the region’s extreme climate. However, adobe is also porous and susceptible to moisture.

Modern building practices often prioritize airtightness to reduce energy consumption. This can involve sealing adobe walls with impermeable materials, trapping moisture within the structure. This trapped moisture creates a breeding ground for mold, particularly in the dark, cool interiors of these homes.

The connection between traditional adobe construction, modern “green” building practices, and the prevalence of lung mold illnesses, specifically focusing on the experiences of residents in Northern New Mexico is real. We need to understand the risks and how to mitigate them.

Let’s delve into the specifics.

Adobe walls “breathe,” allowing moisture to escape. When we seal them, we disrupt this natural process. Think of it like wrapping a sponge in plastic. The moisture can’t evaporate, and mold thrives.

Consider the case of Maria, a resident of Ranchos de Taos. She renovated her family’s ancestral adobe home, adding insulation and sealing the walls to reduce her energy bills. Shortly after, she and her children began experiencing respiratory problems.

A mold inspection revealed extensive Aspergillus and Penicillium growth within the walls. The airtight seal had trapped moisture, creating a perfect environment for mold. Maria’s well-intentioned efforts to improve energy efficiency had inadvertently compromised her family’s health.

This isn’t an isolated incident. Many residents of Northern New Mexico, particularly those living in older adobe homes that have been “modernized,” report similar experiences. The challenge lies in balancing energy efficiency with indoor air quality.

So, how do we address this issue?

First, testing is crucial. Don’t rely on visual inspections alone. Mold can grow hidden within walls.

  • Air Sampling: This involves collecting air samples and analyzing them for mold spores. It provides a general overview of the mold levels in the home.
  • Surface Sampling: This involves swabbing surfaces and analyzing them for mold growth. It’s useful for identifying specific areas of contamination.
  • ERMI (Environmental Relative Moldiness Index) Testing: This is a more comprehensive test that analyzes dust samples for a wider range of mold species. It can provide a more detailed picture of the mold ecology in the home.

You can purchase DIY mold test kits at hardware stores in Santa Fe or order them online. However, for accurate results, it’s best to hire a certified mold inspector. They have the expertise and equipment to conduct thorough testing and interpret the results.

Next, remediation is essential if mold is detected. This is not a DIY project. Improper remediation can spread mold spores and worsen the problem.

  • Professional Mold Remediation: A certified mold remediation company will have the training and equipment to safely remove mold and prevent its recurrence.
  • Containment: The affected area should be contained to prevent the spread of mold spores to other parts of the home.
  • Removal: Moldy materials should be removed and disposed of properly.
  • Cleaning: The affected area should be thoroughly cleaned and disinfected.
  • Drying: The area should be thoroughly dried to prevent future mold growth.

Remember, simply killing the mold is not enough. The source of the moisture must be addressed to prevent it from returning.

Now, let’s talk about prevention. This is where we can truly make a difference.

  • Ventilation: Ensure adequate ventilation throughout the home. Use exhaust fans in bathrooms and kitchens. Open windows regularly, especially during dry periods.
  • Moisture Control: Address any sources of moisture, such as leaky pipes or roofs. Ensure proper drainage around the foundation.
  • Vapor Barriers: Use breathable vapor barriers that allow moisture to escape from the walls. Avoid impermeable materials that can trap moisture.
  • Lime Plaster: Consider using lime plaster on interior walls. Lime is naturally alkaline and inhibits mold growth. It also allows the walls to breathe.

Lime plaster is a traditional material that has been used in adobe construction for centuries. It’s readily available at building supply stores in Española and is relatively easy to apply.

One common mistake is using modern paints on adobe walls. These paints can create an impermeable barrier, trapping moisture. Instead, use breathable paints specifically designed for adobe.

Another pitfall is neglecting to address the source of moisture. Simply removing the mold without fixing the underlying problem is a temporary solution. The mold will inevitably return.

Consider the case of a homeowner in Taos Pueblo who experienced recurring mold problems in their bathroom. They repeatedly cleaned the mold, but it always came back. A professional inspection revealed a leaky pipe behind the shower wall. Once the pipe was repaired, the mold problem was resolved.

The key is to understand the unique characteristics of adobe construction and to choose building materials and practices that are compatible with its natural properties. We need to move away from a one-size-fits-all approach to energy efficiency and embrace solutions that are tailored to the specific needs of adobe homes in Northern New Mexico.

This means prioritizing breathability over airtightness, using natural materials like lime plaster, and ensuring adequate ventilation. It also means educating homeowners about the risks of mold and providing them with the resources they need to test, remediate, and prevent mold growth.

The health of our community depends on it. Let’s work together to create healthy and sustainable adobe homes for generations to come.

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.