Taos Homes: "Green" Build Hiding Deadly Mold?
By Franklin Everett ShawImagine stepping into your dream home in Taos, New Mexico: thick adobe walls radiating a cool, earthy scent, sunlight streaming through handcrafted windows, and the promise of sustainable living. But what if that dream slowly turned into a damp, musty nightmare? Mold, a silent intruder, can quickly take hold in even the most eco-conscious homes, especially in a region with Taos’s unique climate and building traditions.
Taos, New Mexico, with its stunning high-desert landscape and commitment to sustainable living, presents unique challenges when it comes to mold prevention and remediation, particularly in its signature adobe homes. The very materials that make these homes so appealing – adobe bricks, natural plasters, and wood – can also become breeding grounds for mold if moisture isn’t carefully managed. This isn’t about fear-mongering; it’s about proactive homeownership.
Adobe, while excellent for thermal mass and creating a comfortable indoor climate, is highly porous. This means it readily absorbs moisture from rain, snowmelt, and even humidity. Traditional adobe homes often lack a proper vapor barrier, allowing moisture to wick through the walls and create a damp environment conducive to mold growth. The freeze-thaw cycles common in Taos can exacerbate this problem, causing cracks in the adobe that further facilitate water intrusion.
One of the most common mistakes homeowners make is neglecting proper roof maintenance. Leaks in flat or gently sloped roofs, typical of Southwestern architecture, can go unnoticed for extended periods, leading to significant water damage within the walls. Similarly, inadequate drainage around the foundation can cause moisture to seep into the adobe from the ground.
Another challenge is the use of “green” building materials. While these materials are environmentally friendly, some, like cellulose insulation, are more susceptible to mold growth than conventional materials if they get wet. Natural plasters, while beautiful and breathable, can also harbor mold if they contain organic binders and are exposed to excessive moisture.
So, how can Taos homeowners protect their “green” dreams from turning moldy? The first step is vigilance. Regular inspections are crucial. Look for telltale signs of moisture intrusion, such as:
- Water stains on walls or ceilings.
- Peeling paint or wallpaper.
- A musty odor.
- Visible mold growth (often appearing as black, green, or white patches).
Don’t just rely on your eyes and nose. Invest in a moisture meter. These inexpensive devices can detect hidden moisture within walls and floors, allowing you to identify potential problems before they become major infestations. Pay particular attention to areas around windows, doors, and plumbing fixtures, as these are common entry points for water.
If you suspect mold, DIY testing kits can provide a preliminary assessment. These kits typically involve collecting a sample of the suspected mold and sending it to a lab for analysis. While not as comprehensive as professional testing, they can help you determine if you have a mold problem and what type of mold is present.
Here’s a step-by-step guide to DIY mold testing:
- Gather your supplies: You’ll need a mold testing kit (available at most hardware stores), gloves, a mask, and a clean cloth or swab.
- Prepare the area: Gently wipe the suspected mold with a damp cloth to remove any loose debris.
- Collect the sample: Follow the instructions in your testing kit to collect a sample of the mold. This usually involves pressing a sticky slide or swab against the moldy surface.
- Seal and label the sample: Carefully seal the sample in the provided container and label it with the date, time, and location of the sample.
- Send the sample to the lab: Mail the sample to the lab according to the instructions in your kit.
- Await the results: The lab will analyze the sample and send you a report identifying the type of mold present.
If the DIY test confirms the presence of mold, don’t panic. Small areas of mold (less than 10 square feet) can often be remediated yourself. However, for larger infestations, it’s best to call in a certified mold remediation specialist.
For DIY remediation, follow these steps:
- Contain the area: Seal off the affected area with plastic sheeting and tape to prevent the spread of mold spores.
- Protect yourself: Wear gloves, a mask, and eye protection to avoid inhaling or touching mold spores.
- Clean the affected area: Use a solution of water and a mild detergent to scrub the moldy surface. For porous materials like adobe, you may need to use a specialized mold cleaner.
- Disinfect the area: After cleaning, disinfect the area with a solution of bleach and water (1 part bleach to 10 parts water). Never mix bleach with ammonia or other cleaning products.
- Dry the area thoroughly: Use fans or a dehumidifier to dry the area completely. Mold thrives in damp environments, so it’s crucial to remove all moisture.
- Dispose of contaminated materials: Place any contaminated materials, such as cloths or sponges, in a sealed plastic bag and dispose of them properly.
When choosing a mold remediation specialist in Taos, look for someone with experience working with adobe homes and “green” building materials. Ask for references and check their credentials. The Institute of Inspection, Cleaning and Restoration Certification (IICRC) is a reputable organization that certifies mold remediation professionals.
Here are some local Taos resources:
- Taos County Building Department: They can provide information on building codes and regulations related to mold remediation.
- Local hardware stores: They carry a variety of mold testing kits and remediation products.
- Taos Real Estate Agents: They often have a list of reputable mold inspectors and remediation specialists in the area.
Preventing mold is always better than dealing with it after it’s taken hold. Here are some preventative measures specific to Taos homes:
- Ensure proper ventilation: Open windows and use fans to circulate air, especially in bathrooms and kitchens.
- Control humidity: Use a dehumidifier to keep indoor humidity levels below 50%.
- Repair leaks promptly: Fix any leaks in your roof, plumbing, or foundation as soon as possible.
- Improve drainage: Ensure that water drains away from your foundation.
- Consider a vapor barrier: If you’re renovating your adobe home, consider installing a vapor barrier to prevent moisture from wicking through the walls.
- Regularly inspect your roof: Check for cracks, leaks, and damaged flashing.
- Clean gutters and downspouts: Keep gutters and downspouts clear of debris to ensure proper water flow.
Living in a “green” home in Taos is a rewarding experience, but it requires a proactive approach to mold prevention. By understanding the unique challenges of adobe construction and the local climate, and by taking the necessary steps to control moisture, you can protect your home and your health. Don’t let mold steal your Taos dream.