Taos Homes: "Green" Build Hiding Deadly Mold?

Photograph of Franklin Everett ShawBy Franklin Everett Shaw
November 16, 2025

The scent of damp earth and sun-baked clay hangs heavy in the air, a familiar aroma in Taos. But sometimes, that earthy smell takes on a mustier, less welcome note. It’s a sign that something might be amiss within the very walls that define the unique architecture of this high-desert haven: mold.

Taos, New Mexico, a place celebrated for its sustainable earthships and traditional adobe homes, presents a unique paradox. These structures, designed to harmonize with the environment, can inadvertently create microclimates conducive to mold growth. The very materials that make them eco-friendly – earth, recycled tires, and natural plasters – can, under certain conditions, become breeding grounds for unwanted fungal guests.

This isn’t about fear-mongering; it’s about proactive awareness. Let’s delve into the specific challenges Taos residents face, and equip you with the knowledge to identify, test for, and remediate mold effectively in your earthship or adobe home.

Understanding the Taos Mold Challenge

Taos’s climate is characterized by hot, dry summers and cold winters. This dramatic temperature swing, coupled with occasional heavy monsoon rains, creates a cycle of moisture intrusion and evaporation within earth-based structures. Adobe and earthships, while excellent at regulating temperature, can trap moisture if not properly designed and maintained.

  • Adobe’s Porosity: Adobe is inherently porous. It absorbs moisture readily, and if that moisture doesn’t evaporate quickly enough, mold can take hold. This is especially true in areas with poor ventilation or where water damage has occurred.

  • Earthship’s Thermal Mass: Earthships utilize thermal mass to regulate temperature. While beneficial, this can also lead to condensation on interior walls, particularly during temperature fluctuations. The tires used in earthship construction, while recycled, can also trap moisture if not properly sealed.

  • Vapor Barriers (or Lack Thereof): The absence or improper installation of vapor barriers can exacerbate moisture problems. In older adobe homes, vapor barriers were often non-existent, allowing moisture to migrate freely through the walls.

  • Poor Ventilation: Insufficient ventilation, especially in bathrooms and kitchens, traps humidity and creates ideal conditions for mold growth.

Step-by-Step Guide: Identifying, Testing, and Remediating Mold

Step 1: Visual Inspection – The Detective Work

The first line of defense is your own observation. Look for telltale signs of mold:

  • Visible Mold Growth: Obvious patches of black, green, brown, or white growth on walls, ceilings, floors, or around windows and doors.
  • Water Stains: Discoloration or staining on walls or ceilings, indicating past or present water leaks.
  • Musty Odor: A persistent musty or earthy smell, even if you can’t see any visible mold.
  • Condensation: Excessive condensation on windows or walls, especially during colder months.
  • Efflorescence: White, powdery deposits on adobe walls, which can indicate moisture problems and potential mold growth.

Specific Taos Hotspots: Pay close attention to areas prone to moisture:

  • North-facing walls: These walls receive less sunlight and tend to stay cooler and damper.
  • Areas around plumbing: Leaky pipes are a common cause of mold growth.
  • Roofs and ceilings: Roof leaks can lead to significant water damage and mold.
  • Earth berms in earthships: The earth surrounding the structure can introduce moisture.

Step 2: DIY Mold Testing – Confirming Your Suspicions

If you suspect mold, but aren’t sure, DIY mold testing kits can provide a preliminary assessment. These kits typically involve collecting a sample of surface mold or air and sending it to a lab for analysis.

  • Surface Sampling: Use a swab to collect a sample from a visible mold growth area. Follow the kit’s instructions carefully.
  • Air Sampling: Place a petri dish containing a growth medium in a room for a specified period to collect airborne mold spores.

Important Note: DIY kits provide a general indication of mold presence and type, but they are not as accurate as professional testing. If you have significant concerns, consult a certified mold inspector.

Local Taos Resources: You can find DIY mold testing kits at hardware stores like Lowe’s in Taos or online retailers.

Step 3: Professional Mold Inspection – When to Call in the Experts

For extensive mold problems, or if you have health concerns, a professional mold inspection is crucial. A certified mold inspector can:

  • Identify the source of the moisture: This is critical for preventing future mold growth.
  • Assess the extent of the mold contamination: They can determine how far the mold has spread and what areas are affected.
  • Recommend a remediation plan: They can outline the steps needed to safely and effectively remove the mold.

Finding a Qualified Inspector in Taos: Look for inspectors certified by organizations like the Institute of Inspection, Cleaning and Restoration Certification (IICRC) or the American Council for Accredited Certification (ACAC). Ask for references and check online reviews.

Step 4: Mold Remediation – Taking Action

Mold remediation involves removing the mold and addressing the underlying moisture problem. The scope of the remediation depends on the extent of the contamination.

DIY Remediation (for small areas):

  • Containment: Seal off the affected area with plastic sheeting and tape to prevent mold spores from spreading.
  • Personal Protective Equipment (PPE): Wear gloves, a mask (N-95 or higher), and eye protection.
  • Cleaning: Scrub the moldy surfaces with a solution of water and a mild detergent. For porous surfaces like adobe, use a borax-based cleaner.
  • Disposal: Dispose of contaminated materials (e.g., drywall, insulation) in sealed plastic bags.
  • Drying: Thoroughly dry the cleaned area with fans and dehumidifiers.

Professional Remediation (for large areas or toxic mold):

  • Containment: Professionals use more sophisticated containment methods to prevent cross-contamination.
  • Removal: They use specialized equipment and techniques to remove mold safely and effectively.
  • Disinfection: They disinfect the affected area to kill any remaining mold spores.
  • Moisture Control: They address the underlying moisture problem to prevent future mold growth.

Local Taos Remediation Services: Several companies in the Taos area specialize in mold remediation. Research and choose a company with experience in dealing with adobe and earthship structures.

Step 5: Prevention – The Best Defense

Preventing mold growth is always easier and cheaper than remediation. Here are some key preventative measures for Taos homes:

  • Control Moisture:
    • Fix leaks promptly: Repair any leaks in roofs, plumbing, or windows immediately.
    • Improve ventilation: Ensure adequate ventilation in bathrooms, kitchens, and other areas prone to moisture. Use exhaust fans and open windows regularly.
    • Use dehumidifiers: In humid weather, use dehumidifiers to reduce indoor humidity levels.
    • Proper grading: Ensure that the ground slopes away from the foundation to prevent water from pooling around the house.
  • Maintain Your Home:
    • Regularly inspect your home for signs of water damage or mold growth.
    • Clean gutters and downspouts to ensure proper drainage.
    • Consider applying a sealant to adobe walls to reduce moisture absorption.
  • Earthship Specifics:
    • Ensure proper drainage around the earth berms.
    • Monitor condensation levels on interior walls.
    • Consider using a breathable sealant on the interior walls to prevent moisture from penetrating the earth.

Common Mistakes and Pitfalls

  • Ignoring the Problem: Mold problems don’t go away on their own. Addressing them early is crucial.
  • Improper Cleaning: Simply wiping away visible mold is not enough. You need to kill the mold spores and address the underlying moisture problem.
  • Using Bleach on Porous Surfaces: Bleach is not effective at killing mold on porous surfaces like adobe. It only removes the surface stain.
  • Not Addressing the Moisture Source: If you don’t fix the underlying moisture problem, the mold will simply return.
  • DIY Remediation for Large Areas: Attempting to remediate large areas of mold without proper training and equipment can be dangerous and ineffective.

Conclusion: A Healthy Home in Harmony with Taos

Living in a Taos earthship or adobe home is a unique and rewarding experience. By understanding the specific challenges these structures present and taking proactive steps to prevent and remediate mold, you can ensure a healthy and comfortable living environment for yourself and your family. Remember to utilize local resources and don’t hesitate to seek professional help when needed. Your home, built in harmony with the earth, can remain a sanctuary for years to come.

The information provided on Core Wellness Guide is intended for general informational purposes only. The content on this site should not be construed as medical advice, diagnosis, or treatment. Always seek the advice of a qualified healthcare professional before making any changes to your diet, exercise routine, or health regimen. I am not a licensed fitness or health professional. Any exercise or wellness programs or advice you choose to follow are done at your own risk. Core Wellness Guide is not liable for any injuries or damages resulting from the use or misuse of the information on this website. Some of the links on this website are affiliate links, meaning I may earn a small commission if you purchase products through these links. However, I only recommend products that I trust and believe will add value to my readers. Results from fitness and health programs may vary depending on individual factors such as age, gender, and fitness level. Testimonials or success stories on this blog are based on individual experiences and do not guarantee the same results for everyone. This blog may contain links to third-party websites, and I am not responsible for their content, privacy policies, or practices.