Taos Tap Water: Altitude Lies Hiding Copper Harm?
By Franklin Everett ShawThe water in your Taos, New Mexico home might look crystal clear, but appearances can be deceiving. You might be unknowingly drinking water contaminated with copper, a silent threat lurking in aging pipes. This isn’t just about a metallic taste; it’s about your health, especially given Taos’s unique environment. Let’s dive into how to test your water, understand the risks, and take action to protect yourself and your family.
Copper contamination in Taos water isn’t some abstract, far-off problem. It’s a real concern, particularly in older homes with aging plumbing. The high altitude of Taos can exacerbate the issue, as lower atmospheric pressure can affect the corrosivity of water, potentially leaching more copper from pipes.
So, how do you know if you have a problem? The first step is testing your water.
You have two main options: professional testing and DIY kits. Professional testing is the most accurate, but it can be expensive. DIY kits are more affordable and readily available at hardware stores like Lowe’s or Home Depot, or online retailers like Amazon. Look for kits certified by the EPA or meeting NSF standards.
When choosing a DIY kit, pay attention to the detection range. You want a kit that can accurately measure copper levels down to at least 1.3 parts per million (ppm), the EPA’s action level for copper in drinking water. Follow the instructions precisely. Contamination can easily occur if you don’t use sterile containers or if you touch the inside of the sample bottle.
Here’s a step-by-step guide to using a typical DIY copper testing kit:
- Gather your materials: The kit should include a sample bottle, a reagent (chemical that reacts with copper), and a color chart.
- Flush your pipes: Run the cold water tap for 3-5 minutes to clear out any stagnant water. This ensures you’re testing the water coming from the main supply, not just what’s been sitting in your pipes.
- Collect your sample: Fill the sample bottle with cold water from the tap. Avoid touching the inside of the bottle.
- Add the reagent: Carefully add the reagent to the water sample, following the kit’s instructions.
- Wait: Let the sample sit for the specified time (usually a few minutes).
- Compare the color: Compare the color of the sample to the color chart provided in the kit. This will give you an estimate of the copper level in your water.
If your test reveals copper levels above 1.3 ppm, don’t panic. It’s time to take action.
High copper levels can pose several health risks, especially for infants and young children. Copper toxicity can lead to gastrointestinal distress, liver damage, and kidney problems. In Taos, the potential for dehydration due to the dry climate can further exacerbate these effects.
What can you do about it? Several mitigation strategies exist.
- Flush your pipes regularly: Running your cold water tap for a few minutes each morning can help clear out water that has been sitting in the pipes overnight, reducing copper levels.
- Install a water filter: This is often the most effective solution. Look for filters certified by NSF International for copper reduction.
- Consider a whole-house filter: For comprehensive protection, a whole-house filter can remove copper from all the water entering your home.
- Replace your plumbing: If your pipes are old and corroded, replacing them with copper alternatives like PEX or CPVC can eliminate the source of the contamination.
- Contact the Town of Taos Water Department: They can assess the water quality in your area and provide information on any ongoing issues or planned infrastructure improvements. They can also advise on specific steps you can take to address copper contamination in your home.
Choosing the right water filter can be overwhelming. Here’s a breakdown of common types and their effectiveness:
- Pitcher filters (e.g., Brita, PUR): These are the most affordable option, but they are not very effective at removing copper.
- Faucet filters: These attach directly to your faucet and offer better filtration than pitcher filters. Look for models specifically designed to remove heavy metals like copper.
- Under-sink filters: These are installed under your sink and provide filtered water on demand. They are more expensive than faucet filters but offer superior filtration.
- Whole-house filters: These are installed on the main water line entering your home and filter all the water used in your house. They are the most expensive option but provide the most comprehensive protection.
When selecting a filter, always check for NSF certification. This ensures that the filter has been independently tested and verified to meet specific performance standards for copper reduction.
One common mistake people make is neglecting to replace their filter cartridges regularly. A clogged filter can actually increase copper levels in your water, as it becomes less effective at removing contaminants. Follow the manufacturer’s instructions for filter replacement.
Another pitfall is assuming that boiling water will remove copper. Boiling water will kill bacteria, but it will not remove heavy metals like copper. In fact, boiling water can actually concentrate copper levels, as some of the water evaporates.
Let’s consider a hypothetical scenario: The Martinez family in Taos noticed a bluish-green stain around their faucets, a telltale sign of copper corrosion. They used a DIY test kit and found copper levels of 2.0 ppm, well above the EPA’s action level. They installed an under-sink filter certified for copper reduction and retested their water after a week. The copper levels had dropped to 0.5 ppm, well within the safe range.
Don’t wait until you see signs of copper contamination. Proactive testing and mitigation are essential for protecting your health and ensuring the safety of your drinking water in Taos. Take control of your water quality today.