Taos Toxins: Altitude Lies Hiding Water Harm?
By Franklin Everett ShawThe tap water runs a little cloudy some days, doesn’t it? You might shrug it off, blaming the old pipes, but in Taos, New Mexico, ignoring that cloudiness could be a gamble with your health. Nestled high in the Sangre de Cristo Mountains, Taos faces unique water challenges that demand a closer look, especially if you rely on well water.
This article is your guide to understanding and tackling those challenges. We’ll dive deep into the specific contaminants plaguing our local water, focusing on arsenic, lead, and perchlorates. We’ll equip you with the knowledge to interpret water quality reports, test your well water effectively, and choose the right filtration system for your home. And importantly, we’ll connect you with state resources that can help make clean water accessible to everyone in Taos County.
Taos’s high altitude and distinctive geology significantly impact its water quality. The increased elevation means water boils at a lower temperature, potentially affecting the effectiveness of some boiling-based purification methods. The region’s volcanic rock formations and historical mining activities contribute to the presence of naturally occurring arsenic and heavy metals like lead in the groundwater.
Arsenic, a naturally occurring element in the Earth’s crust, is a major concern in Northern New Mexico. It leaches into groundwater from surrounding rocks. Long-term exposure to arsenic can lead to various health problems, including skin damage, circulatory issues, and an increased risk of cancer.
Lead contamination often stems from aging plumbing infrastructure. Older homes in Taos, particularly those built before the 1980s, may have lead pipes or lead solder connecting copper pipes. Lead can leach into the water supply, especially when the water is corrosive. Even low levels of lead exposure can be harmful, particularly for children and pregnant women, affecting brain development and causing learning disabilities.
Perchlorates, while not naturally occurring, are another potential contaminant. These chemicals, used in rocket fuel, explosives, and fertilizers, can seep into groundwater from industrial or agricultural sources. Perchlorate exposure can interfere with thyroid function, which is crucial for metabolism and development.
Testing your well water is the first crucial step in ensuring its safety. The New Mexico Environment Department (NMED) recommends testing private wells annually for bacteria, nitrates, and total dissolved solids. However, given Taos’s specific challenges, you should also test for arsenic, lead, and perchlorates.
Here’s a step-by-step guide to testing your well water:
- Choose a certified laboratory: NMED maintains a list of certified labs in New Mexico that can analyze your water sample. Look for labs accredited for the specific contaminants you want to test for. A local option is usually best to minimize transport time.
- Obtain a sample kit: The certified lab will provide you with a sample kit containing sterile bottles and instructions. Follow the instructions carefully to avoid contaminating the sample.
- Collect the sample: Typically, you’ll need to run the water for a few minutes before collecting the sample. This ensures you’re getting a representative sample of the water in your well. Collect the sample from a tap that is frequently used and hasn’t had water sitting in it for an extended period.
- Submit the sample: Return the sample to the lab promptly, following their instructions for delivery or shipping.
- Receive and interpret the results: The lab will send you a report with the test results. The report will indicate the concentration of each contaminant and whether it exceeds the EPA’s Maximum Contaminant Level (MCL).
Understanding your water quality report is essential. The report will list each contaminant tested, the concentration found in your sample (usually in parts per million or parts per billion), and the EPA’s MCL for that contaminant. If the concentration exceeds the MCL, it means your water is not safe to drink and you need to take action.
For example, if your report shows an arsenic level of 15 parts per billion (ppb), and the EPA’s MCL for arsenic is 10 ppb, your water exceeds the safe limit. Similarly, any detectable level of lead requires immediate attention.
Addressing water contamination in Taos requires choosing the right filtration system. The best system depends on the specific contaminants present in your water.
Here are some options:
- Reverse Osmosis (RO) Systems: RO systems are highly effective at removing a wide range of contaminants, including arsenic, lead, perchlorates, and nitrates. They work by forcing water through a semi-permeable membrane that filters out impurities. RO systems are typically installed under the sink and provide purified water for drinking and cooking.
- Activated Carbon Filters: These filters are good at removing chlorine, sediment, volatile organic compounds (VOCs), and improving the taste and odor of water. However, they are not very effective at removing arsenic or lead.
- Specialized Arsenic Filters: These filters use adsorption media to specifically target and remove arsenic from water. They are a good option if arsenic is your primary concern.
- Whole-House Filters: These filters are installed on the main water line and treat all the water entering your home. They are useful for removing sediment, chlorine, and other contaminants that can affect plumbing fixtures and appliances.
Choosing the right filtration system can be tricky. Consider these factors:
- Contaminant type and concentration: The type and concentration of contaminants in your water will determine the type of filter you need.
- Water usage: Consider how much water you use for drinking, cooking, and other purposes. This will help you determine the size and capacity of the filter you need.
- Flow rate: Make sure the filter has a flow rate that meets your needs. A low flow rate can result in a trickle of water.
- Maintenance: All filters require maintenance, such as replacing cartridges or cleaning the system. Consider the maintenance requirements and costs before making a purchase.
- Cost: Filtration systems range in price from a few dollars for a simple pitcher filter to several thousand dollars for a whole-house RO system. Set a budget and choose a system that meets your needs and fits your budget.
Many residents of Taos County struggle to afford the cost of water testing and treatment. Fortunately, several state-funded resources are available to help.
- New Mexico Environment Department (NMED): NMED offers resources and information on water quality testing and treatment. They also provide financial assistance programs for low-income households.
- New Mexico Mortgage Finance Authority (MFA): MFA offers loans and grants for home improvements, including water well repairs and replacements.
- Rural Community Assistance Corporation (RCAC): RCAC provides technical assistance and training to small communities in New Mexico on water and wastewater issues.
Contacting these organizations can provide valuable information and financial assistance to ensure access to safe and clean drinking water. Don’t hesitate to reach out and explore the available options.
One common mistake is assuming that if your neighbor’s water is safe, yours is too. Water quality can vary significantly even within a small area due to variations in geology and well construction. Another pitfall is neglecting regular maintenance of your filtration system. Filters need to be replaced regularly to maintain their effectiveness. Failing to do so can lead to a buildup of contaminants and reduced water quality.
Another challenge is interpreting complex water quality reports. Don’t hesitate to contact the certified lab that performed the test for clarification. They can explain the results in plain language and help you understand the implications for your health.
Living in Taos, New Mexico, means embracing the beauty of the high desert, but it also means taking responsibility for your water quality. By understanding the unique challenges we face, testing your well water regularly, choosing the right filtration system, and accessing available resources, you can ensure that you and your family have access to safe and clean drinking water. Don’t wait until there’s a problem. Take action today to protect your health and well-being.