Taos Toxins: Altitude Lies Hiding Water Risks?
By Franklin Everett ShawThe air in Taos, New Mexico, is thin and crisp, carrying the scent of piñon and juniper. But what it doesn’t carry, and what you can’t see, might be the most important thing to consider when you turn on the tap.
Taos, nestled high in the Sangre de Cristo Mountains, presents a unique set of challenges when it comes to water quality, especially for those relying on private wells. The combination of altitude, geology, and historical land use practices can create a perfect storm of potential contaminants. Ignoring these factors is a gamble with your health.
Let’s dive into the specifics of why your Taos well water might be a silent threat, and, more importantly, what you can do about it.
The High-Altitude Hazard: Why Taos is Different.
Altitude isn’t just about breathtaking views; it affects water chemistry. Lower atmospheric pressure at Taos’ elevation (around 7,000 feet) can influence the volatility of certain contaminants, making them more readily absorbed into your body. Radon, a radioactive gas, is a prime example. It’s naturally occurring in many Taos soils, and its effects are amplified at higher altitudes.
Arsenic: The Invisible Enemy.
Arsenic is a naturally occurring element found in the bedrock of northern New Mexico. It leaches into groundwater, contaminating wells. Long-term exposure, even at low levels, can lead to various health problems, including skin lesions, cardiovascular disease, and cancer. The challenge with arsenic is that it’s tasteless, odorless, and invisible. You won’t know it’s there unless you test for it.
Radon: The Silent Killer.
Radon is a radioactive gas formed from the natural decay of uranium in soil and rock. It’s the second leading cause of lung cancer in the United States. In Taos, radon can seep into well water and then be released into the air when you shower, wash dishes, or even run the tap. Because it’s a gas, it’s easily inhaled, posing a significant health risk.
Other Potential Contaminants: A Taos Cocktail.
Beyond arsenic and radon, other contaminants can plague Taos wells. These include:
- Lead: From old plumbing systems.
- Nitrates: From agricultural runoff and septic systems.
- Bacteria: Coliform bacteria, indicating potential fecal contamination.
- Fluoride: Naturally occurring, but sometimes at levels exceeding EPA standards.
Testing Your Well Water: A Step-by-Step Guide.
Don’t rely on assumptions or outdated information. Testing is the only way to know what’s in your water. Here’s how to do it right:
- Find a Certified Lab: The New Mexico Environment Department provides a list of certified labs. Don’t use a home test kit for critical contaminants like arsenic or radon; they’re often inaccurate.
- Choose the Right Tests: Ask the lab for a “standard potable water analysis” or a “comprehensive well water test.” This should include arsenic, radon, nitrates, bacteria, lead, copper, and fluoride. Specify that you are in Taos, NM, and ask if they recommend any additional tests based on local geology.
- Follow Sampling Instructions Precisely: The lab will provide specific instructions for collecting your water sample. Follow them exactly. Contamination during sampling is a common mistake.
- Interpret the Results: The lab will provide a report with your test results. Compare these results to EPA Maximum Contaminant Levels (MCLs). If any contaminants exceed the MCLs, take action immediately.
Filtration and Mitigation: Taking Control of Your Water.
Once you know what’s in your water, you can choose the right filtration system. There’s no one-size-fits-all solution.
- Arsenic Removal:
- Reverse Osmosis (RO): Highly effective, but can be expensive and waste water.
- Adsorptive Media: Uses specialized media to bind to arsenic. More cost-effective than RO.
- Radon Mitigation:
- Aeration Systems: These systems bubble air through the water, releasing radon gas before it enters your home.
- Granular Activated Carbon (GAC) Filters: Can remove radon, but require frequent replacement.
- General Filtration:
- Sediment Filters: Remove sand, silt, and other particulate matter.
- Carbon Filters: Improve taste and odor, and remove chlorine.
Common Mistakes and Pitfalls: Avoiding the Traps.
Many homeowners make critical errors when dealing with well water contamination. Here are some to avoid:
- Ignoring the Problem: “Out of sight, out of mind” is a dangerous approach.
- Relying on Anecdotal Evidence: Just because your neighbor’s water is fine doesn’t mean yours is.
- Installing the Wrong Filter: A simple carbon filter won’t remove arsenic or radon.
- Neglecting Maintenance: Filters need to be replaced regularly to remain effective.
- DIY Solutions: Unless you’re a qualified water treatment professional, leave complex installations to the experts.
Real-World Scenario: The Martinez Family of El Prado.
The Martinez family, long-time residents of El Prado, a small community just north of Taos, had been drinking well water for generations. They never considered testing it until a family member developed unexplained skin lesions. Testing revealed high levels of arsenic. They installed an adsorptive media filter specifically designed for arsenic removal. Regular testing now ensures their water remains safe.
The Long-Term View: Protecting Your Health and Investment.
Investing in water testing and filtration is an investment in your health and the value of your property. Untreated well water can lead to serious health problems and decrease your home’s resale value. Regular testing (at least annually) is crucial to monitor water quality and ensure your filtration system is working effectively.
Don’t wait for symptoms to appear. Take proactive steps to protect your well water in Taos. Your health depends on it.